44 Solid State Relay Manufacturers in 2024
This section provides an overview for solid state relays as well as their applications and principles. Also, please take a look at the list of 44 solid state relay manufacturers and their company rankings. Here are the top-ranked solid state relay companies as of April, 2024: 1.Durex Industries, 2.WIN SOURCE ELECTRONICS, 3.Broadcom.
Table of Contents
What Is a Solid-State Relay?
Solid State Relays are contactless relays that use semiconductors to transmit input signals to output circuits.
Generally, they are suitable for situations where relays are frequently opened and closed and high-speed response is required since high response and long life can be established.
Applications of Solid State Relays
Solid State Relays are used in situations where the on/off frequency is high, such as in temperature control systems, where their high responsiveness and long life can be maximized.
In addition, unlike general contact-type relays that use magnetic force, there is no mechanical sliding contact. Since no noise is generated by the opening and closing of the contacts, they are often incorporated into products that are vulnerable to noise.
On the other hand, the transmission of signals uses light emission phenomena via semiconductors and diodes. Therefore, there is no small amount of temperature rise effect and the output stage is a semiconductor device. Care must be taken because some parts are not suitable for products with high voltage and high current.
Principle of Solid State Relay
Figure 1. The principle of semiconductor relay
As the relay is said to be contactless, the circuit on the input side is physically isolated from the circuit on the output side, and the signal is transmitted through an opto-isolated device such as a photocoupler.
When an electric current is applied to a light-emitting diode on the input side, the diode emits light, and a circuit on the output side receives the light, and the output circuit operates when the light is detected. Depending on the supplier of Solid State Relays, photodiode arrays, photocouplers, and phototriacs are used for the light-receiving circuit, and variations such as MOSFETs and triacs exist for the output section.
The use of light for signal transmission provides a very fast response. Also, since they do not have mechanical contacts, the contact parts do not wear out, and they generally have a longer service life than contact-type relays.
Other features include the fact that the input and output are completely insulated by an insulating element, so noise generated on the input side is less likely to be transmitted to the output side.
How to Select a Solid-State Relay
First, it is necessary to consider how much responsiveness is required in the circuit where the relay is needed and how often the signal is transmitted. If you do not need such high responsiveness and only low-frequency signal transmission, general contact-type relays are often smaller and less expensive.
If a Solid State Relay is required, also check the maximum current value of its input signal. Since Solid State Relays are output circuits using semiconductors, excessive current flow will damage the semiconductors themselves, rendering them unusable for further use.
Other Information on Solid State Relays
1. Comparison of Solid State Relay and Mechanical Relay
Figure 2. Semiconductor relay and mechanical relay
The difference between a Solid State Relay and a Mechanical Relay is whether they are contactless or contactless types. Semiconductor Relays, also called Solid State Relays, are contactless relays, while Mechanical Relays are contact relays.
Solid State Relays with no contacts are switched on and off by signal transmission only, with no mechanical closing or opening in the electronic circuit. A mechanical relay with contacts has movable parts built into the circuit and uses a coil to generate an electromagnetic force that causes the contacts to make contact and switch ON/OFF.
Solid State Relays and Mechanical Relays each have the following features, which can be used according to your needs.
- Features of Solid State Relays
- Compact and lightweight
- Long life
- Low noise level
- High-speed operation
- High resistance to vibration
- Leakage current
- Low resistance to heat.
- ON resistance
- Features of Mechanical Relays
- High insulation and high voltage resistance
- No leakage current
- Almost no ON resistance
- No operation noise.
- Wear of contacts and breakdown of movable terminals
- Influence of external magnetic field
- Chattering
Solid State Relays have the advantage of being compact and capable of opening and closing at high speeds, and they do not suffer from contact wear and failure as mechanical relays do. On the other hand, mechanical relays have almost no ON resistance, and their strength is that they can be easily used in circuits with high voltage and high power.
2. Solid State Relays for Automotive Applications
Automobiles are equipped with many relays as parts that control the operation of lamps, windshield wipers, audio equipment, motors, blinkers, and so on. In general, mechanical relays have been used for automotive relays.
However, mechanical relays have the disadvantages of limited contact life and large installation space. In recent years, the number of electrically driven in-vehicle devices has been increasing due to the need for low fuel consumption and low power consumption and the multifunctional nature of advanced technology, which has created a need for smaller and lighter relays.
Figure 3. Example of automotive semiconductor relay specifications
Solid State Relays have been developed for automotive applications to overcome the shortcomings of mechanical relays and are gradually replacing them. Figure 3 shows an example of Solid State Relay specifications for automotive applications.
The use of Solid State Relays has made it possible to reduce size and weight, which not only secures space in the vehicle but also contributes to improved fuel efficiency. In addition, the use of high current, which has been a bottleneck, can now be handled thanks to low ON-resistance achieved through advances in semiconductor technology.
List of 44 Solid State Relay Manufacturers
*Including some distributors, etc.
Sort by Features
- Default
- Company Size: largest first
- Year Founded: oldest first
- Year Founded: earliest first
Sort by Area
- United States of America
- Austria
- China
- France
- Germany
- India
- Italy
- Japan
- Slovenia
- Taiwan
- Turkey
- The AQY234SX comes in a 4-SOP package with gull wing termination style.
- On-state resistance is a maximum of 35 Ohm, and it has a voltage rating of 0~400V.
-
-
-
WIN SOURCE ELECTRONICS
Solid State Relays
Company Overview
Win Source Electronics is an AS9120B-certified business-to-business (B2B) distributor of electronic products, accessories and components that was established in Shenzhen, China, in 1999. The company stocks products from over 3,000 manufacturers, including C&K Components, Fujitsu Electronics America, and American Zettler, Inc. These products include power supplies and converters, memory modules, and RFID devices for wireless communication. The company primarily markets its products to clients in Asia's consumer electronics, energy, and industrial manufacturing sectors.
-
-
-
-
-
Broadcom
Solid-state Relays
Manufacturer Overview
Broadcom Inc., established in 1961, and headquartered in San Jose, California, is a manufacturer and supplier of semiconductor and connectivity solutions. The company specializes in producing products, such as semiconductors, infrastructure software, networking products, storage products, wireless products in which their products cater to industries such as telecommunications, data centers, and consumer electronics. Their products are used for various applications, including wireless communication, networking equipment, data storage, and multimedia devices, providing components for advanced technologies in numerous industrial and commercial sectors.
-
-
-
-
-
Littelfuse, Inc
Standard Solid State Relay
Manufacturer Overview
Littlefuse was founded in 1927 and headquartered in the United States. Littlefuse is a diversified industrial technology manufacturing company with customers globally. Littlefuse has products segments which are electronic, industrial, and transportation. Electronic segment products include fuses and fuse accessories, positive temperature coefficient resettable fuses, polymer electrostatic discharge suppressors, and varistors. Transportation products include blade, resettable, and high-current and high-voltage fuses, as well as battery cable protectors; fuses, switches, relays, circuit breakers, and power distribution modules. The Industrial segment offerings include contactors, transformers, and temperature sensors for use in renewable energy and energy storage systems, electric vehicle infrastructure, HVAC systems.
-
-
-
-
-
Sensitron Semiconductor
Solid State Relays
Manufacturer Overview
Sensitron Semiconductor, founded in 1969 with corporate headquarters located in the USA, is a manufacturer of power electronic components and systems for the defense, aerospace, space, and medical markets. The company's products include high-power rectifier bridges, motion control modules, TVS modules, solid-state power controllers, and high voltage diode assemblies, as well as various services including, engineering, electrical and mechanical design, material science expertise, and testing of a finished power system. The company's facility includes a wafer fabrication clean room and a microelectronics manufacturing clean room.
-
-
-
-
-
Durex Industries
SOLID STATE RELAYS - RM SERIES
Manufacturer Overview
Durex Industries is an American ISO 9001 certified manufacturer of heaters, temperature sensors, and controls founded in 1980 before its acquisition by the British company Spirax-Sarco Engineering in 2022. Based in Cary, Illinois, the company offers thermal solutions and custom engineering of electric heaters, temperature sensors, process heating systems, and temperature controls. They serve clients in various industries including those in packaging, medical and life sciences, semiconductor manufacturing, and aerospace technology. Durex Industries also provides design, contract manufacturing, and testing services to customers with unique projects.
-
-
-
-
-
Vishay Intertechnology, Inc.,
SOLID STATE RELAYS
Manufacturer Overview
Vishay Intertechnology, Inc. (Vishay) was incorporated in 1962 and is headquartered in Malvern, Pennsylvania. The company serves the industrial, automotive, telecommunications, consumer products, and medical end markets and sells its products under numerous brand names inlcuding Siliconix, Draloric, Beyschlag, UltraSource, and Applied Thin-Film Products. The company manufactures and sells discrete semiconductors and passive electronic components in globally while operating in six market segments: MOSFETs, diodes, optoelectronic components, resistors, inductors, and capacitors.
-
-
-
-
-
Watlow Electric Manufacturing Company
Solid State Relays
Manufacturer Overview
Watlow Electric Manufacturing Co. was established in 1922 and is headquartered in St. Louis, Missouri as a manufacturer and designer of heating solutions. Their product portfolio includes electric resistive heaters, temperature sensors, temperature and power controllers, and supporting software. The industrial technology and thermal products offered by the company are crucial components in optimising thermal performance, decreasing design time, and improving the efficiency of products and applications. The company's sales offices span 16 countries, serving diverse industries like semiconductor processing, energy processes, environmental chambers, diesel emissions, and foodservice equipment, among others.
-
-
-
-
-
Sensata Technologies, Inc.
Solid State Relays
Manufacturer Overview
Sensata Technologies was originally founded in 1916 as General Plate Company and is now headquartered in Attleboro, Massachusetts. The company is a developer, manufacturer, and seller of sensors and sensor-rich solutions, electrical protection components, and other products used in automotive, industrial, energy, telecom, and construction industries. The company has 20 product categories including force sensors, tire management solutions, inverters & charges, and pressure sensors.The company’s next generation of products are designed to improve the efficiency of industrial pumps, fuel efficiency in ICE cars and energy efficiency in TVs, and facilitate usage of IoT devices.
-
-
-
-
-
Applebee-Church, Inc.
SOLID STATE RELAY DRIVER FOR SSR SERIES
Company Overview
Applebee-Church, Inc., established in 1957, operates as a distributor and manufacturer's representative specializing in electrical heating systems. The company is headquarted in Peach Tree Corners, Georgia with branch offices in the states of Florida, Alabama, and South Carolina. The company offers products and services such as electric heater systems, industrial heating systems, electric comfort heat, and power temperature controls. These solutions cater to needs of both the industrial and commercial heating and control sectors.
-
-
-
-
-
Opto 22
DC60MP
Company Overview
Opto 22, established in 1974 and based in Temecula, California, USA, is a manufacturer and supplier of automation products. The company's product range includes groov RIO, groov EPIC System, groov Case Studies, Product Selector, and Product Families. These products aid in integrating control, connectivity, and cybersecurity in industrial settings. They serve the automation machinery manufacturing sector. The company's services include securely accessing systems at remote locations, collecting and processing operational and energy data, developing real-time control programs, and building operator HMI screens.
-
-
-
-
-
E-T-A Elektrotechnische Apparate GmbH
SOLID STATE RELAYS
Manufacturer Overview
E-T-A, founded in Bayern, Germany, in 1948 is a manufacturer of overcurrent protection, power distribution, relays and intelligent systems. The company's product portfolio includes thermal-magnetic devices as well as magnetic and hydraulic-magnetic circuit breakers, battery isolation switches, power entry modules, and solid state relays and intelligent systems. The company serves industries such as Oil and Gas, Aerospace and Defense, Automotive and Transportation, Construction, and Power Generation. They have 4 production sites and operate in more than 60 countries.
-
-
-
-
Manufacturer Overview
Excel Cell Electronic, founded in 1981 is a manufacturer and supplier of electromechanical components and stamping products headquartered in Taiwan. The company offers electromechanical components including industrial control switches, stepping motors, terminal blocks, resettable fuses, and relays. Their stamping products include heat spreaders for BGA, high-precision electronic components, and lead frames of semiconductors for discrete devices / integrated circuit & photoelectric products. The company is ISO/TS 16949:2009, CNS15506: 2011, TOSHMS: 2007, ISO 14001, and ISO 9001-certified, and their products are used in various applications in optoelectronic, security systems, power energy, network, and communication industries.
-
-
-
-
-
-
-
GEYA
Solid State Relay
Manufacturer Overview
Geya is an electrical equipment manufacturer established in China in 2007. It produces electrical control devices, low voltage protection devices, solar energy equipment, and circuit breaker SKDs in compliance with CE, UL, and other international certification standards. The company's ISO 9001-certified factory has a production capacity of over 100,000 parts per month, it offers OEM and ODM services for the development of custom solutions, and it exports to over 30 countries.
-
-
-
-
-
E. Dold & Söhne GmbH & Co. KG／住所ドイツ語表記
Solid state relays / contactors
Manufacturer Overview
DOLD is a manufacturer of safety and interlocking devices, founded in 1928, with headquarters located in Furtwangen, Germany. Their product range includes safety relays, electronic housings, safety switches, as well as solenoid interlocks, and key transfer systems. These devices play a crucial role in ensuring secure operations, controlling access, and protecting workers and equipment during manufacturing processes. DOLD is certified according to DIN EN ISO 9001:2015 for quality management and quality systems.
-
-
-
-
-
Gefran SpA
solid state relay
Manufacturer Overview
Gefran is an Italian manufacturer of industrial process automation systems that was founded in Provaglio d'Iseo, Brescia in 1960. The company produces regulatory drives and inverters, various sensors, and automation components such as programmers and controllers. It also offers tailor made systems for specific industrial processes, including thermoforming, injection molding, and extrusion. Gefran products are primarily used in factory automation, as well as by clients in the metalworking, plastics, material handling, and food processing sectors.
-
-
-
-
-
ETI Elektroelement d.o.o.
Industrial, miniature and slim relays
Manufacturer Overview
ETI is a manufacturer of electrical protection and control products based in Slovenia, Central Europe where it was established in 1950. The company deals in circuit breakers and switches along with enclosures, distribution boards, and equipment ETIBOX. The company is also known for manufacturing transformers, contractors, fuses, and control devices. These products are installed as integral solutions for the protection of electrical equipment and components in residential and commercial buildings, in the field of electric power and industry electrical installations.
-
-
-
-
-
EL.CO SRL
SOLID STATE RELAYS
Manufacturer Overview
EL.CO SRL, established in 1986 and based in Italy, is a manufacturer of solid-state relays, static relay interface modules, power supplies, and temperature controllers. The company products are CE-certified, and the static relays have also acquired the VDE and UL/CSA marks. The company's quality system has received TÜV certification in compliance with UNI EN ISO 9001:2015. The company provides goods for the food and beverage line, the packaging industry, and injection moulding. It supplies its products to different places worldwide, including Austria, Belarus, Germany, and the USA.
-
-
-
-
-
FUJITSU COMPONENT LIMITED
Relays
Manufacturer Overview
Fujitsu Component Limited was founded in Japan jointly by Fujitsu Limited and Takamizawa Electric Co. Ltd in 1995 which is a global manufacturer and seller of switching devices (relays) and Human interface devices such as keyboards, thermal printers, touch panels and switches. Their relay portfolio consists of relays for signal, power and automobiles applications. In addition they also manufacture eco friendly relay products. Fujitsu has establish several global support centers worldwide to ensure uninterrupted service. The group has adopted an environment philosophy which states that they will adhere to the corporate activities while improving their coexistence with the environment.
-
-
-
-
-
Toshiba Electronic Devices & Storage
Solid State Relays
Manufacturer Overview
Toshiba Electronic Devices & Storage Corporation is a division of Toshiba focusing on providing designs for end-product developers as well as semiconductor and drive equipment for automotive, industrial equipment, green energy, and consumer and personal electronic devices. Toshiba’s storage products include cloud-scale and enterprise-level products, and PC hard drives. Semiconductor products include Si Cower devices, MOSFETs, IGBTs, IEGTs, isolators, solid state relays, power management and intelligent power ICs, diodes, bipolar transistors, microcontrollers, automotive devices, ICs for wireless communication equipment, general purpose logic ICs, radio-frequency devices, sensors, and linear image sensors.
-
-
-
-
-
SAI TECH CONTROLS
Solid State Relays
Manufacturer Overview
SAI TECH CONTROL, established in 2005, is an Indian manufacturer and supplier based in Pune, Maharashtra, specializing in flow measuring instruments. The company offers an extensive range of products, including capacitive, inductive, optical, and magnetic proximity switches, along with diesel generator (DC) battery chargers, electromagnetic coils, electromagnetic vibrator controllers, and switching mode power supplies (SMPS). Additionally, the company provides digital counters, digital revolutions per minute (RPM) indicators, digital timers, alarm annunciators, and temperature sensors. Its offerings also extend to level sensors and rotary encoders. These products are utilized across diverse industries such as the automobile, chemical, food processing, packaging, and pharmaceutical sectors.
-
-
-
-
-
Jiangsu GOLD Electric Control Technology Co., Ltd
Single Phase Solid State Relay
Manufacturer Overview
Jiangsu GOLD Electric Control Technology Co., Ltd. was established in 1992 and is a manufacturer of solid-state relays in Wuxi, China. Its products include solid-state relays, power semiconductor modules, voltage and power regulation controllers and soft start controllers, wind turbine governors, and intelligent temperature control instruments. The company passed the ISO9001 quality management system certification in 2000 and was identified by "Global Resources" as one of China's three major production bases for solid-state relays in 2002. The company has two production and manufacturing bases in Wuxi Industrial Design Park, Hudai Industrial Park, and Liyuan Development Zone.
-
-
-
-
-
Ascon Tecnologic
Solid state relays
Manufacturer Overview
Ascon Tecnologic, established in 1969 in Vigevano, Lombardia, Italy, is a manufacturer of control and automation products for manufacturing, processing machinery, and commercial refrigeration. Its array of offerings includes PAC systems, I/O modules, software, controllers, and sensors. It aslo offers solid-state relays, and many more. Certified with UNI EN ISO 9001:2015, its products are also UL-CSA certified for North American markets. The company won the “CAESAR Competition for Authenticated Encryption” in the Lightweight Applications category in 2019, earning a spot in the subsequent NIST competition for its deeply analyzed algorithm.
-
-
-
-
-
Autonics Corporation
Solid State Relays
Manufacturer Overview
Autonics Corporation, established in 1977 and based in Busan, South Korea, is a developer and manufacturer of automation products, which are marketed worldwide. Some of its products include sensors, peripheral connection equipment, motion devices, control devices, and process automation instruments. The automation products are used in various industries, including automotive, packaging, machine tools, metal, and marine. The company has 12 international offices spanning over 100 countries, a fully automated warehouse system, and various international quality certifications, including RoHS, CE, UL, and EAC. Its safety products meet the functional safety standards IEC 61508 and mechanical safety standards ISO 13849.
-
-
-
-
-
iNORÉA
Solid state relays
Manufacturer Overview
iNORéA, founded in 2011 and headquartered in Bègles, France, is a distributor and supplier of electrical components and industrial automation devices. The company's products include a full range of solid-state relays, electric motor starter boxes, and boxed assortments of electrical supplies, which include cable glands, crimp terminals, and terminals. iNORéA caters to both individual and commercial customers, providing discounts for bulk purchases and incentives for manufacturers and distributors to participate in its partnership program.
-
-
-
-
-
Intelligent Appliance
Solid State Relay
Manufacturer Overview
Intelligent Appliance is an Israeli data acquisition and control devices manufacturer that was established in Netanya in 2011. The company’s specialized product portfolio includes analog and digital remote I/O controllers, industrial data acquisition and control devices for measuring or monitoring physical parameters, and relay controllers for switching high power loads on and off using signals from a network or terminal. It also offers web-enabled control and monitoring devices and software, along with custom design and development services for customer-requested products. The company’s products are primarily used in the automation, robotics, private security, and defense sectors.
-
-
-
-
-
Hillesheim GmbH
Solid State Relay
Manufacturer Overview
Hillesheim GmbH, a company founded in 1979 and headquartered in Waghäusel, Germany, is a manufacturer of heating hoses and tracer heating systems. Specializing in precision engineering, the company produces flexible tracer heaters, temperature controllers, and surface heating element parts utilized in various sectors, including automotive, aerospace, and manufacturing. The company is ISO 9001 certified, ensuring quality control and adherence to industrial quality standards in its production processes. It also adds fire prevention features to its products to ensure fire safety.
-
-
-
-
-
TE Connectivity
Solid State Relays
Manufacturer Overview
TE Connectivity Ltd., started in 2007 and headquartered in Schaffhausen, Switzerland, is a designer and manufacturer of sensor and connectivity solutions for harsh conditions. It operates three primary segments, namely transport, industrial, and communication solutions, and its product portfolio includes automotive connectors, fiber optic connectors, analog power meters, RTD sensors, and circuit breakers. It serves customers in approximately 140 countries and several industries, including aerospace, automotive, rail, IoT connectivity, and E-mobility. The company manufactures 192 billion products annually and has invested over 610 million USD in research development and engineering.
-
-
-
-
-
Omron Automation
Solid State Relays
Manufacturer Overview
Omron Automation, situated in Hoffman Estate, IL established in 1933 is a manufacturer and supplier of fully integrated automation solutions to various industries. The complete portfolio of the company provides safety services, training, and automation services to keep people safe, protect their capital investment and increase their overall equipment effectiveness. The company has 80+ years of industry experience to benefit its clients. Whether a client is looking to protect their people, understand their functional safety risks, train their team, or refurbish a robot, the company can provide customized services to meet their client's needs.
-
-
-
-
-
anxele Co., Ltd.
Solid State Relay
Company Overview
Anxele Co., Ltd., established in 2003 and headquartered in Zhejiang, China, is a manufacturer and distributor of a wide variety of electrical products. The company offers a range of electrical products, including photovoltaic new energy systems, electrical protections, and distribution boxes. It also provides industrial plugs, sockets, and terminal blocks. Its products are designed for high and low-voltage power transmission and distribution, as well as solar energy systems. The company has also won TUV, CE, CB, S-Memko, UKCA, ISO9000, and CQC certifications. It serves industries such as manufacturing, solar energy, industrial control, and power transmission.
-
-
-
-
-
Tense Elektronik
Digital Temperature Control Relay with SSR
Company Overview
Tense Elektronik is a manufacturer and supplier of electronic products and technologies in industrial automation solutions established in Turkey since 2006. The company specializes in automatic control sensors, controllers, energy analyzers, multimeters, frequency meters, ammeters, timers, among others. It serves industrial sectors such as automotive, manufacturing, construction, food and aerospace. The company's products improve operational efficiency, fluid processes in industries and the optimization of production lines and quality control processes. The company has certification in the Iso 9001:2015 Quality Management System, TSE Certificate and RoHS.
-
-
-
-
-
Yudian Hong Kong Automation Technology Co., Ltd
SOLID STATE RELAY
Company Overview
Yudian Hong Kong Automation Technology Co., Ltd, established in 1991 and based in Hong Kong, China, is a manufacturer and supplier of industrial process automation controller instruments. The company's product range includes an AI series of intelligent industrial/temperature controllers, multi-channel indicating/alarming instruments, flow totalizers, voltage/current/power meters, and paperless recorders. These products are designed for temperature management, steam flow regulation, pressure control, and various other functions. It serves the chemical, petroleum, metallurgy, and food and beverage industries. The company offers research and development, sales support, product customization, and maintenance services.
-
-
-
-
-
Connectwell Industries Pvt. Ltd.
Solid State Relay
Company Overview
Connectwell, established in 1978 in Mumbai, India, is a manufacturer and supplier of terminal blocks, interface modules, professional tools, and switching power supplies. The company holds ISO 9001 certification, and its product range offers flexible solutions for electrical and electronics applications, including connecting and routing electrical wires and components efficiently. Its products are designed to simplify wiring processes, reduce installation times, and enhance the overall performance of electrical connections. It serves a wide range of industries, including automation, control systems, energy, and industrial manufacturing, where the products play a vital role in streamlining electrical connections and ensuring stable performance.
-
-
-
-
-
Régulateurs GEORGIN
Intrinsic safety
Company Overview
Georgin, established in 1939 and located in France, is a manufacturer and supplier of industrial instrumentation and process safety equipment. The company offers a product range that encompasses control and measurement devices for physical quantities, catering to both normal and hazardous atmospheres. Georgin's product range spans temperature sensors with quick coupling for transformers, ensuring efficient application. These sensors find utility in various industries, including industrial processing, military, shipbuilding, railways, and electricity production. Their role is pivotal in measuring and controlling pressure and temperature while ensuring the safety of electrical signals
-
-
-
-
-
Greegoo Electric Co., Ltd.
Solid State Relays
Company Overview
Greegoo Electric Co. Ltd., established in 1995, is a Chinese manufacturer and supplier based in Wenzhou, Zhejiang, producing motor control units and switch gears. Certified with ISO 9001:2015, the company offers over 1,000 standard models, including bridge rectifiers, diode and thyristor modules, and rectifier diodes. Other product offerings include phase control thyristors (PCT), solid-state relays, and vacuum contractors. The company serves customers in over 50 countries worldwide, including original design manufacturers (ODMs).
-
-
-
-
-
shengyuic
Solid-state relays
Company Overview
Shenzhen Shengyu Electronics Technology Ltd., founded in 2008 and headquartered in Shenzhen, China, is an electric component distributor that is ISO 9001 certified. The company stocks several components, including switches, capacitors, and resistors, which it sources from multiple manufacturers like Seiko Instruments, Inc., Renesas Electronics America, and Nuvoton Technology Corporation America. Depending on the size and configuration of the customer’s components, the company provides a full range of packaging services. It accepts single or multiple-part quotations, and its website allows customers to search hundreds of products ranging from ICs to computer accessories.
-
-
-
-
-
Vincotech
Solid State Relays
-
-
-
-
-
Waytek, Inc.
Solid State Relays
Company Overview
Waytek Inc., founded in 1970 and headquartered in Chanhassen, Minnesota, is a distributor of automotive wire and DC electrical components across North America. The company offers a broad line of products, including circuit breakers, cable ties, and connectors, serving wire harness manufacturers, OEMs, and upfitters. It sources the products from manufacturers such as GEP Power Products, Lovato Electric Inc., and East Penn Manufacturing. In 1980, the company stopped producing wire harnesses and started concentrating on distribution. In 2021, CIT Relay and Switch awarded it the Blast-Off Growth Award for being among the growing distributors of Picker Components products.
-
-
-
-
-
Richardson RFPD
Solid State Relay
Company Overview
Richardson RFPD, based in Geneva, Illinois, is an electronic component distributor that became a subsidiary of Arrow Electronics in 2011. The company stocks products such as antennas, power supplies, and ICs, and its engineering team brings together over 600 years of combined design experience in IoT product development, wireless, and RF, making it competent from conception to production. The company is ISO 9001 certified and has three international distribution hubs in Asia, Europe, and North America. It sells products from several brands, including Advanced Thermal Solutions, Empower RF Systems Inc., and Carlisle Interconnect Technologies.
-
-
-
-
-
Celduc groupe
Single Phase SSR
-
-
-
-
-
ROOT2 LTD
ULTRA LOW NOISE SOLID STATE RELAYS
-
-
-
-
-
CROUZET
Solid State Relay
-
-
-
-
-
Weidmüller Interface GmbH & Co. KG
Relay Modules & Solid-State Relays
Distributor Overview
Weidmüller Interface GmbH & Co. KG, established in 1850 and headquartered in Detmold, Germany, is a supplier of electronic equipment for electrical connectivity. The company's product range spans terminal blocks, connectors, relay modules, and power supplies. The company also offers automation and industrial PC software, accessories, and assemblies. It provides solutions in various fields such as decentralized automation, E-mobility, photovoltaics, single-pair Ethernet, and smart metering. The company holds DIN EN ISO 9001 accreditation for quality assurance management and offers various services such as customized products, support, digital ordering options, consulting, and engineering.
-
-
-
-
-
Meusburger Georg GmbH & Co KG
SOLID STATE RELAY
Distributor Overview
Meusburger Georg GmbH & Co KG., founded in Germany in 1964, is a supplier of high-precision standard parts and products for workshop equipment and control systems. The company's product portfolio includes a selection of screws, nuts, bolts, and washers that meets rigorous industry standards, precision-ground shafts and rods are available in various materials and size and precision bearings. It serves a diverse range of industries, including automotive, aerospace, manufacturing, construction, and more.
-
-
Solid State Relay Manufacturer Ranking
*Including some distributors, etc.Ranking as of April 2024
Derivation Method| Rank | Company | Click Share |
|---|---|---|
| 1 | Durex Industries |
7.4%
|
| 2 | WIN SOURCE ELECTRONICS |
7.0%
|
| 3 | Sensata Technologies, Inc. |
5.8%
|
| 4 | SAI TECH CONTROLS |
5.0%
|
| 5 | Broadcom |
5.0%
|
| 6 | Vishay Intertechnology, Inc., |
5.0%
|
| 7 | Sensitron Semiconductor |
4.3%
|
| 8 | Omron Automation |
3.5%
|
| 9 | ECE |
3.5%
|
| 10 | Opto 22 |
2.7%
|
Derivation Method
The ranking is calculated based on the click share within the solid state relay page as of April 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.Number of Employees
- Toshiba Electronic Devices & Storage: 23,100
- Meusburger Georg GmbH & Co KG: 1,700
- WIN SOURCE ELECTRONICS: 250
Newly Established Company
- Toshiba Electronic Devices & Storage: 2017 (7 years ago)
- anxele Co., Ltd.: 2003 (21 years ago)
- WIN SOURCE ELECTRONICS: 1999 (25 years ago)
Company with a History
- Régulateurs GEORGIN: 1939 (85 years ago)
- ETI Elektroelement d.o.o.: 1950 (74 years ago)
- Sensitron Semiconductor: 1969 (55 years ago)
Solid State Relay Manufacturers in United States
*Including some distributors, etc.
- Broadcom
- Littelfuse, Inc
- Sensitron Semiconductor
- Durex Industries
- Vishay Intertechnology, Inc.,
- Watlow Electric Manufacturing Company
- Sensata Technologies, Inc.
- Applebee-Church, Inc.
- Opto 22
Global Distribution of Solid State Relay Manufacturers by Country
*Including some distributors, etc.
| Country | Number of Companies | Share (%) |
|---|---|---|
|
United States of America
|
9 | 31.0% |
|
China
|
5 | 17.2% |
Germany
|
3 | 10.3% |
Japan
|
3 | 10.3% |
Italy
|
2 | 6.9% |
India
|
2 | 6.9% |
Taiwan
|
1 | 3.4% |
Slovenia
|
1 | 3.4% |
Turkey
|
1 | 3.4% |
France
|
1 | 3.4% |
Austria
|
1 | 3.4% |
