1. Metoree
  2. Testing Equipment
  3. Calibrators
Description 140 Manufacturers 22 Products
Zumbach Electronics Corp.
Zefon International
Zalkin
YSI Inc.
Yokogawa Test & Measurement Corporation
Yokogawa Electric Corporation
Witels Albert USA, Ltd.
Vitrek Corp.
Vaisala Oyj
Tri-State Instrument Laboratory
Transmille Ltd
Transmille Calibration

140 Calibrator Manufacturers in 2024

This section provides an overview for calibrators as well as their applications and principles. Also, please take a look at the list of 140 calibrator manufacturers and their company rankings. Here are the top-ranked calibrator companies as of April, 2024: 1.SPEKTRA, 2.KISTERS, 3.PCE Instruments UK Ltd.

Table of Contents

Supervisor of this article
Makoto Niwa
Makoto Niwa

1993~2019: Engaged in pharmaceutical research and development and analysis of various biological samples at the Pharmaceutical Research Institute of Japan Kayaku Co., Ltd. He is also in charge of facility management as a dangerous goods handler and radiation handling chief. 2019: Moved to another company in the same industry and has been in charge of similar work until now. He also writes, translates, and edits specialized books.
Linkedin: https://www.linkedin.com/in/makoto-niwa-25331040/　
Researchmap: https://researchmap.jp/0000-0002-2355-1222/

What Is a Calibrator?

A calibrator is a device or instrument used to calibrate a measuring instrument.

Calibration is the process of comparing the accuracy of a measuring instrument to a standard and ascertaining the deviation from the value that should be indicated. The deviation is called "instrumental error", and the instrumental error is like the individual difference of measuring instruments. As with any measuring instrument, there is a small amount of deviation, so it is important to understand the deviation.

Instrumental error also fluctuates depending on the environment and deterioration. Therefore, it is necessary to perform calibration on a regular basis. Calibration ensures the reliability of the results measured by the calibrator.

Principle of Calibrators

Calibration is performed by measuring the characteristics of the calibrators itself (eg, mass and dimensions) or the output from the calibrators (eg, current) using the calibrators to be calibrated. For example, an electronic balance weighs a weight or a micrometer measures a block gauge.

The difference between the measured value and the calibrator's assigned value is the instrumental error. Calibration is completed when the instrumental difference is known. Properly calibrated calibrators are the basis of the calibration operation.

Uses of Calibrators

Calibrators are used to determine the condition of the measuring instruments to be calibrated. Calibration is usually performed periodically.

However, the calibrators themselves also needs to be calibrated. Since it is burdensome to maintain calibrators, one option is to outsource periodic calibration to a specialist. On the other hand, there are cases where calibrators are used for self-inspection of measuring instruments, although this has a different meaning from the original calibration.

While daily inspections are conducted to ensure that there is no significant loss of accuracy, formal calibration can be conducted once every six months or so. In this case, the calibrators should still be calibrated on a regular basis.

Other Information on Calibrators

1. Calibrators and Traceability

Calibrators are standards used to calibrate measuring instruments. As a standard, it needs a reference to indicate the standard (proper value). That is, calibrators must be calibrated by a superior standard.

The higher level standard is then calibrated to another higher level standard, and so on, culminating in the highest standard in the country.

This connection to standards is called "traceability". This makes it possible to compare the results of the same type of measurement anywhere in the country. Each country confirms the interchangeability of its standards with the International Committee of Weights and Measures and other organizations.

2. Accuracy of Calibrators

Calibrators should be more accurate than the equipment to be calibrated. This is because it allows for more appropriate and practical control. In other words, if the magnitude of the discrepancy is determined with low accuracy, it will not be useful for measurement at the accuracy that the equipment to be calibrated can originally demonstrate.

3. Example of Micrometer Calibration

As an example of calibration, let the micrometer be the measuring instrument and the block gauge be the calibrators.

  • Measuring instrument: Micrometer
  • Calibrator: Block gauge

The smallest unit of a micrometer is 1μmm => "1/1000 mm of 1 mm". Since the condition of calibrators are to have higher accuracy than a measuring instrument, the smallest unit of a block gauge is 0.1μmm => "1/1000th of 1mm".

In this way, the calibrators, the block gauge, will have a higher accuracy. By calibrating the micrometer with the block gauge before and after measurement, the error can be known. Performing this before and after measurement provides the most reliable calibration results.

Depending on your measurement control policy, you may wish to calibrate your micrometer periodically instead of every measurement, and keep a record for reference. Periodic calibration allows for estimation of conditions during that period.

On the other hand, if measurements are taken without any calibration at all, the measured values are unreliable because the errors are not known. In addition, it is necessary to calibrate the block gauge, which serves as a calibrators, using calibrators that is even more accurate than the block gauge.

List of 140 Calibrator Manufacturers

*Including some distributors, etc.

Sort by Features

  • Default
  • Company Size: largest first
  • Year Founded: oldest first
  • Year Founded: earliest first

Sort by Area

  • United States of America
  • Canada
  • China
  • Czech Republic
  • Denmark
  • Finland
  • France
  • Germany
  • India
  • Italy
  • Japan
  • Netherlands
  • Singapore
  • Switzerland
  • Taiwan
  • United Kingdom
    • Gagemaker
      • United States of America Address: 712 East Southmore Avenue Pasadena, Texas, United States of America

      Manufacturer Overview

      Gagemaker is a manufacturer of industrial-grade measurement devices and inspection equipment that was established in Pasadena, Texas, USA, in 1979. The company primarily produces taper gages, thread height gages, and lead gages for large-diameter measurement or API thread inspection. It also offers indicators, cases, and calibration equipment for its portfolio products. The company is ISO 9001-certified, and provides custom design, part measurement, and inspection services to its clients. It chiefly serves the oil and gas, mining, and machine shop industries.

    • TEGAM Inc.
      • United States of America Address: 10 Tegam Way, Geneva, Ohio, United States of America

      Manufacturer Overview

      TEGAM, established in 1979 and headquartered in Geneva, Ohio, USA, stands as a manufacturer and provider of advanced test and measurement solutions. The company serves industries such as electronics, telecommunications, and aerospace. Its product line encompasses precision measurement tools, temperature and humidity measurement devices, and RF power sensors, addressing the needs of sectors that prioritize precise measurements. TEGAM's quality is evident through its ISO 9001 certification and industry awards. American Association for Laboratory Accreditation (A2LA) has also accredited this company for its specific calibrations listed on Certificate Number 2018.01.

    • Restek Corporation.
      • United States of America Address: 110 Benner Circle Bellefonte, Pennsylvania, United States of America

      Manufacturer Overview

      Restek Corporation is a chromatography products manufacturer founded in 1985 and headquartered in Bellefonte, Pennsylvania. The company offers various products including sample preparation and collection products like solid phase extraction (SPE) cartridges, liquid chromatography (LC) and supercritical fluid chromatography (SFC) columns, and reference standards used for calibration and quality control purposes. Other products include accessories such as flow meters, regulators, and valves. These are used for monitoring the quality of soil, air, and water, as well as petrochemicals and pharmaceuticals. Restek Corporation provides clients with tech support, product education, and custom solution services.

    • Time Mark Corp.
      • United States of America Address: 11440 E Pine St Tulsa, Oklahoma, United States of America

      Manufacturer Overview

      Time Mark Corp., founded in 1972 and based in Tulsa, Oklahoma, is a manufacturer of special control devices and related accessories for various industrial applications. The company's product folio includes 3-phase monitors and testers, current monitors, liquid level controls, transformers, and, transducers that have a variety of uses in digital transmission, electronics gadgets, appliances, energy, and, electrical industries. The company also offers a 5-year warranty on 3-Phase Monitors and all other standard products have a 1-year warranty.

    • Omega Engineering, Inc.
      • United States of America Address: 800 Connecticut Ave. Suite 5N01, Norwalk, Connecticut, United States of America

      Manufacturer Overview

      OMEGA Engineering Inc., founded in Norwalk, CT, in 1962 is a manufacturer of products used to measure temperature and humidity, flow and level, and pressure. The company's product portfolio includes thermocouple probes and assemblies, pressure gauges and switches, and air velocity measurement systems, wireless systems and portable optic sensors. The company serves markets including Automotive and Electric Vehicles, Renewable Energy and Energy Storage and Electronics and IT Infrastructure. The company also offers customer services that include support, custom research projects and customized services.

    • Sierra Instruments
      • United States of America Address: 5 Harris Court, Building L Monterey, California, United States of America

      Manufacturer Overview

      Sierra Instruments, founded in 1971, is a manufacturer of flow measurement solutions for the gas, liquid, and steam sectors. The product line has incline or insertion mass flow controllers/meters, level switches, flow conditioners, calibration systems, and mass flow sensors. The company provides digital communication protocols to automate flow meters and software upgrades & improvements. The company in Monterey, CA, offers a 12-month limited warranty, is ISO 9001 registered, and is a member of the TASI group.

    • Alicat Scientific
      • United States of America Address: 7641 N. Business Park Drive, Tucson, Arizona, United States of America

      Manufacturer Overview

      Alicat Scientific, established in 1991, and based in Arizona, USA, is a manufacturer and supplier of flow and pressure instrumentation. The product portfolio includes a diverse range of mass flow meters and controllers, liquid flow meters and controllers, pressure transducers and controllers, accessories, and replacement parts. The products are used in various industries which include aerospace, defense, bioreactors, calibration, metrology, food, environmental, glass, and optical. The company products have ISO certifications. The company also offers technical instrumentation documentation with support and services.

    • Astronics Corporation.
      • United States of America Address: 130 Commerce Way,East Aurora, New York, United States of America

      Manufacturer Overview

      Astronics Corporation is a manufacturer based in East Aurora, New York, specializing in electronic and mechanical systems for aerospace, defense, electronics, and semiconductor industries. Their diverse product range includes power and motion systems, connectivity and data systems, and lighting and safety systems. Astronics Corporation also offers aircraft cabin interiors such as environmental control system, fuel access door, passenger service unit, and smart tray. Their products are utilized in the development of urban air mobility vehicles, aircraft outfitting, and defense systems. They also provide services for design, tooling, integration, and installation to support global airframe manufacturers and prime OEMs.

    • Palmer Wahl Instrumentation Group
      • United States of America Address: 234 Old Weaverville Road Asheville, North Carolina, United States of America

      Manufacturer Overview

      Palmer Wahl Instruments Inc., started in 1836 and based in North Carolina, United States, is a manufacturer of industrial temperature and pressure equipment. The company offers various temperature products, such as utility thermometers, thermowells, temperature sensors, and bimetal thermometers, as well as pressure products, such as pressure gauges, pressure chart recorders, and calibrators. The company holds ISO 9001:2015 certification and adheres to ANSI/NCSL Z-540 and MIL-STD-45662A standards. Its products find application in the electronic, HVAC, manufacturing, medical, and transportation sectors in the USA, Australia, Denmark, Sweden, and Iceland.

      • United States of America Address: 13847 Aberdeen Street NE Ham Lake, Minnesota, United States of America

      Manufacturer Overview

      Larson Systems Inc., established in 1979 and headquartered in Ham Lake, MN, United States, is a manufacturer of spring testing equipment and machines. The company's products are motorized spring testers, torsion spring testers, and calibration equipment. It also offers accessories, including spring data collection software. These products are used in various industries, including aerospace, automotive manufacturing, and medical equipment manufacturing. The company's services include torque wrench calibration, the supply of replacement parts, and volume order discounts.

    • envea
      • United States of America Address: 2623 Kaneville Court Geneva, Illinois, United States of America

      Manufacturer Overview

      Envea is a developer and manufacturer of environmental management products that was originally established in Poissy, France, as Environnement SA in 1978 before rebranding in 2022. The company’s product lineup includes emissions monitoring products such as stack emission analyzers, dioxin analyzers, and flue gas analyzers. It also offers air monitoring products such as particulate monitors, and process environment products such as flow meters. The company operates internationally, with manufacturing and R&D locations in Europe, the United States, and Asia.

    • Advanced Energy Industries, Inc.
      • United States of America Address: 1595 Wynkoop Street, Suite 800, Denver, Colorado, United States of America

      Manufacturer Overview

      Advanced Energy Industries, Inc., founded in 1981 and based in Denver, Colorado, is a manufacturer, distributor, and supplier of precision power conversion, measurement, and control solutions. Its products, include AC-DC power supply units, DC-DC conversion products, and high voltage amplifiers, which are used in mission-critical applications across various industries such as healthcare, telecommunications, and industrial equipment. The company offers on-site support, capable of securing and mounting products, managing electrical connections, and conducting tests as per specifications.

    • Dytran Instruments, Inc.
      • United States of America Address: 21592 Marilla Street, Chatsworth, California, United States of America

      Manufacturer Overview

      Founded in 1980, Dytran manufactures high-quality dynamic testing solutions from its 45,000-square-foot facility in Chatsworth, California. Dytran designs and manufactures innovative sensors, accelerometers, and associated electronics for measuring dynamic force, pressure, and vibration. The company offers a wide range of product lines, with full in-house customization capabilities to provide customers with a one-stop shop for test and measurement requirements. Dytran's specializations include designing single-axis and triaxial IEPE accelerometers, ultra-high temperature charge mode sensors, pressure sensors, and digital bus-based sensors. Dylan is reputed for its sensor technologies for both product development testing and embedded solutions.

    • Morehouse Instrument Co.
      • United States of America Address: 1742 Sixth Ave. York, Pennsylvania, United States of America

      Manufacturer Overview

      Morehouse Instrument Co., established in 1920 and based in York, PA, USA, is a manufacturer and supplier of force and torque calibration services and products. The company's product range includes load cells, load cell indicators, force gauges, hardness testers, and load cell accessories. These products are essential for accurate force and torque measurements across various sectors. It serves industries such as aerospace, automotive, energy, and manufacturing. The company's services include force calibration, torque calibration, aircraft & truck scale calibration, and tractel calibration and repair.

    • YSI Inc.
      • United States of America Address: 1700/1725 Brannum Ln., Yellow Springs, Ohio, United States of America

      Manufacturer Overview

      YSI, Yellow Springs Instruments is a manufacturer and supplier of water measurement solutions based in Ohio since 1948. The company produces a range of water measurement solutions such as Aquaculture Process Monitors, Sensors, Colorimeters, Photometers, Gas Chromatography Equipment, and more, catering to environmental surveillance, laboratory assessments, and industrial procedures, helping with measuring pH levels, dissolved oxygen, nitrate concentrations, algae presence, and various other parameters. They also encompass underwater and surface vehicles to facilitate surveys for industries like Aquaculture, Ocean and Coastal, Irrigational canals and Turnouts, and Ports and Harbors, The products also cater to Life sciences, Food and beverages, and more.

    • SKC, INC.
      • United States of America Address: 1000 SKC Drive, Covington, Georgia, United States of America

      Manufacturer Overview

      SKC, Inc. is a manufacturer and supplier based in the United States, established in 1962, specializing in quality products for air sampling and environmental monitoring. SKC offers a comprehensive range of products including air sampling pumps, monitoring instruments, and sampling media. These solutions cater to industries like industrial hygiene, occupational safety, and environmental assessment. SKC's is devoted to promoting the well-being of individuals and communities by delivering accurate tools for air quality analysis.

    • Rex Gauge, LLC.
      • United States of America Address: 1250 Busch Parkway, Buffalo Grove, Illinois, United States of America

      Manufacturer Overview

      Rex Gauge Company Inc., established in 1946 and headquartered in Illinois, US, is a manufacturer that specializes in durometer hardness gauges. The company offers a range of products, including durometer models, test block kits, operating stands, O-ring hardness kits, multi-scale durometers, and more. It also offers accessories, material thickness gauges, and pocket hardness testers. The products can measure hardness on multiple durometer scales, providing adaptability for different materials. In 2005, its custom durometer SG-5000 was officially luched as a Certified Space Technology. The company serves various industries such as science & technology, manufacturing, aerospace, defense, and more.

    • Setra Systems, Inc.
      • United States of America Address: 159 Swanson Rd. Boxborough, Massachusetts, United States of America

      Manufacturer Overview

      Setra Systems is a manufacturer and supplier of sensing solutions, founded in 1967 and headquartered in Massachusetts, USA. The company's product portfolio includes various sensors and instruments, such as differential pressure sensors, absolute pressure sensors, relative pressure sensors, and more. These sensors find applications in HVAC, medical, industrial automation, and aerospace industries. The company also provides custom sensor solutions tailored to the specific requirements of its customers. The company offers technical support to help customers select suitable sensors for particular applications.

    • Mensor LP
      • United States of America Address: 201 Barnes Drive San Marcos, Texas, United States of America

      Manufacturer Overview

      Based in San Marcos, Texas, Mensor LP is an American supplier founded in 1969. Specializing in electronic pressure measurement, the company provides customized solutions for pressure measurement and control across a range of industries, including automotive, aerospace, heating, ventilation, and air conditioning (HVAC), and power engineering. In 2006, Mensor joined WIKA Group, an American manufacturer specializing in measurement and calibration technology since 1946. Along with the British manufacturers DH-Budenberg and ASL (Automatic Systems Laboratories), which were acquired by WIKA Group in 2011 and 2013, Mensor develops calibration technology for pressure, temperature, and electrical measurements.

    • Zefon International
      • United States of America Address: 5350 SW 1st Lane Ocala, Florida, United States of America

      Manufacturer Overview

      Zefon International was established in 1990 and is a manufacturer and supplier of air sampling equipment used to monitor indoor environmental, occupational health, and safety conditions. Based in Florida, USA, the company offers product categories such as contaminants and pollutants, air sampling equipment, industrial hygiene equipment, sampling media, and cassettes. Its popular products include air sampling pumps, cassettes, filters, and accessories. It also offers multiple services, such as technical support, training, and custom sampling programs. Zefon International's products are used by many organizations, including environmental consulting firms, industrial hygienists, and government agencies.

    • TEL-TRU MANUFACTURING COMPANY
      • United States of America Address: 408 St. Paul Street, Rochester, New York, United States of America

      Manufacturer Overview

      Tel-Tru Manufacturing Co., founded in 1916, is an American manufacturer based in Rochester, New York, developing industrial temperature, test, and pressure instruments. The company's temperature and test instruments include bimetal and digital thermometers, non-contact thermometers, and check-set dry block calibrators. The company also provides thermowells, remote monitoring systems, as well as resistance temperature detectors (RTDs). Pressure instruments, such as pressure gauges and transmitters, are also part of the company's portfolio. These products find applications in various sectors, including composting, food and beverage, as well as heating, ventilation, and air conditioning (HVAC).

    • FLUKE Corporation
      • United States of America Address: 6920 Seaway Blvd, Everett, Washington, United States of America

      Manufacturer Overview

      Headquartered in Everett, Washington, Fluke is an American-born company operating since 1948. Fluke offers a variety of testing equipment including digital multimeters, thermal cameras, solar PV testing equipment, thermometers, oscilloscopes, leak detection devices, as well as testing-equipment related accessories. Fluke offers direct online sales.

    • Fluke Calibration
      • United States of America Address: 6920 Seaway Boulevard, Everett, Washington, United States of America

      Manufacturer Overview

      Fluke Corporation, established in 1948 and based in Everett, Washington, is a manufacturer of precision calibration solutions. The company provides instrumentation and software tailored for electrical, temperature, pressure, flow, and RF measurements. These instruments are commonly utilized in calibration laboratories and process measurement instrument shops globally, including National Metrology Institutes. The companu also offers services and software solutions for assisting organizations in effectively managing assets and operations, with support ranging from individual to enterprise-level integration.

    • CME, a division of Aerospace Control Products

      • CME, a division of Aerospace Control Products
        Calibrators

      • United States of America Address: 1314 WEST 76TH STREET, DAVENPORT, Iowa, United States of America

      Manufacturer Overview

      CME Inc manufactures standard and custom laminar test equipment for gas flowmeters; oxygen test stands, flow calibrators, and laminar flow elements. Laminar equipment is used to prevent contamination in settings with controlled, smooth airflow, such as cleanrooms. The company’s products include digital, analogue, and portable flowmeters, transducers, calibrators, gages, indicators, totalizers, oxygen systems, and stands. The company, based in Davenport, Iowa, primarily serves the US Military laboratories and has been doing so for the past forty years. They also serve industrial calibration laboratories, and their products are NIST traceable.

    • Badger Meter, Inc.
      • United States of America Address: 4545 West Brown Deer Road, Milwaukee, Wisconsin, United States of America

      Manufacturer Overview

      Badger Meter, Inc. was founded in 1905 and based in Milwaukee, Wisconsin. Badger Meter is a manufacturer and marketer of flow measurement, quality, control, and communication solutions in the United States and globally. Badger Meter serves several industries including water treatment, water distribution, aviation, concrete production. Badger Meter offers utility water solutions and commercial & industrial solutions product segments. Together they include products such as meters, software, diagnostics, and quality monitoring.

    • Gage-Line Technology, Inc.
      • United States of America Address: 121 LaGrange Avenue Rocheste, New York, United States of America

      Manufacturer Overview

      Gage-Line Technology, Inc., established in 1972 with headquarters in Rochester, New York, is a manufacturer of precision optical graphics, patterns, and devices. Their diverse product line includes sight and hard gages, reticles, resolution targets, optical slits, test patterns, stage micrometers, calibration glass grids, encoder discs, and timing strips, utilized for various applications in metrology, gaging, optical, and imaging industries. They also provide a range of capabilities, including CAD design, artwork plotting, fixture tooling, optical alignments, and assembly services.

    • Environics Inc.
      • United States of America Address: 69 INDUSTRIAL PARK ROAD EAST TOLLAND, Connecticut, United States of America

      Manufacturer Overview

      Environics Inc., established in Tolland, CT in 1986 is a manufacturer of computerized gas flow instrumentation for gas mixers, gas dilution and calibration systems. Their product portfolio includes Ambient Monitor Gas Calibrators, Zero Air Generators, Water Vapor Gas Standard Generator, Gas Divider Systems and Reduced Oxygen Breathing Devices. The company's products find applications including, Hypoxia Research, Sensor Testing, Medical/Biological Mixing and food packaging. The company also offers customer services that include technical support, custom research projects and customized services.

    • Epsilon Technology Corp.
      • United States of America Address: 3975 South Highway 89 Jackson, Wyoming, United States of America

      Manufacturer Overview

      Epsilon Technology Corp., founded in 1993, is a manufacturer of extensometers, clip-on gages, deflectometer, knife edges and electronics & signal conditioners. The extensometers include non-contact, axial, transverse & diametral, bolt-proof & lap shear, and customised extensometers. Calibration systems and calibration modules are provided, and the products are used in manufacturing and engineering industries. The company in Jackson, WY, offers services such as troubleshooting, recalibration, and repair, and all the products have a 12-month warranty. A2LA has qualified the company to the ISO/IEC 17025 international calibration standard, and DNV has certified the company to the ISO 9001 international quality management system.

    • Ectron Corp.
      • United States of America Address: 9340 Hazard Way, Suite B2, San Diego, California, United States of America

      Manufacturer Overview

      Ectron Corp. is an American manufacturer of data acquisition and calibration instruments that was established in San Diego, California in 1964. The company produces various sensor simulators including thermocouples and pressure transducers, as well as simulators, amplifiers, data loggers, transmitters, and calibrators. These are critical in industries whose processes require precise measurement and control of data, such as in automotives, aerospace, energy, and defense. Ectron Corp. has served client companies and institutions such as the Massachusetts Institute of Technology (MIT), ExxonMobil, and NASA.

    • Keller America, Inc.
      • United States of America Address: 351 Bell King Rd, Newport News, Virginia, United States of America

      Manufacturer Overview

      KELLER America, Inc. was founded in 1975 and based in Newport News, Virginia. The company’s founder developed the first integrated silicon pressure measuring cell and since its founding, the company has been a developer in pressure measurement solutions for numerous industries including automotive, aerospace, and power generation. In addition to optional accessories, the company has 9 main product lines. Among these are OEM Sensors Transducers & Transmitters, Pressure Calibrators, Digital Pressure Gauges, Pressure Pumps, and Custom Pressure Solutions.

    • Vitrek Corp.
      • United States of America Address: 12169 Kirkham Rd. Poway, California, United States of America

      Company Overview

      Vitrek Corp, established in 1990 and based in Poway, California, USA, is a manufacturer and supplier of high voltage test and measurement equipment. The company's product range includes Non-Contact Measurement devices, MTI Instruments Accumeasure Capacitance Products, Portable Hand-Held Signal Simulators/Calibrators, and Semiconductor/Solar Metrology Systems. These products are designed for various testing and measurement tasks. They mainly serve the electronic, appliance, medical, aerospace, and semiconductor industries. The company's services include safety and electrical test equipment provisioning, solar and metrology system offerings, vibration/engine balancing system solutions, and high-speed data acquisition.

    • RKI Instruments, Inc
      • United States of America Address: 33248 Central Ave, Union City, California, United States of America

      Company Overview

      RKI Instruments, Inc., established in 1994 and headquartered in California, United States, is a manufacturer and supplier of specialized gas detector solutions. The company's range of products includes portable multi-gas monitors, wireless gas detectors, and detector heads. Its multi-gas monitors could detect four types of gases, LEL, O2, H2S, and CO. The products are used to protect life and property from hazards of gas and vapors. It serves various industries, including oil and gas, water and wastewater, and chemical plants. It has passed the ISO 9001 certification that concerns quality management systems.

    • Sensidyne, LP
      • United States of America Address: 1000 112th Circle North, Suite 100 St. Petersburg, Florida, United States of America

      Company Overview

      Sensidyne is an American manufacturer and distributor of industrial air monitoring and safety equipment founded in 1983 and acquired by the German company Schauenburg International GmbH in 2008. Based in St. Petersburg, Florida, the company offers various products including aerosol and heat stress monitors, sound and vibration measurement equipment, air sampling instrumentation, and gas detector tube systems. Sensidyne also provides additional OEM, in-house calibration, and maintenance services for clients requiring additional support.

    • CardinalHealth
      • United States of America Address: 7000 Cardinal Place Dublin, Ohio, United States of America

      Company Overview

      Cardinal Health, established in 1971 and headquartered in Dublin, Ohio, USA, is a global manufacturer and distributor of pharmaceuticals, medical, and lab products. Operating in 30+ countries with 46,500 employees, Cardinal is also a provider of data solutions for healthcare facilities. The company serves nearly 90% of U.S. hospitals, over 60,000 pharmacies, and 10,000+ specialty offices. Cardinal is recognized by awards in diverse accolades, including LGBTQ Workplace Equality, Top Companies for Executive Women, Noteworthy Company for Diversity, Top Hospitals and Health Systems, Top Companies for People with Disabilities, among others.

    • Witels Albert USA, Ltd.
      • United States of America Address: 27 NE Industrial Road, Branford, Connecticut, United States of America

      Company Overview

      Witels Albert USA, Ltd. (WAUS) is an American distributor of tube and wire processing equipment that was established in 1995 as a subsidiary of German company Witels Albert GmbH. Based in Branford, Connecticut, the company offers preform heads for wire or profile shapes, wire straightening guides, and flatwire or strip straightening rolls, as well as wire and tube straighteners and feeders. It also offers cabling accessories (e.g. strippers, cutters) and spare parts for portfolio products. WAUS primarily serves clients in the construction, automotive, and electrical industries.

    • Sterlco Sterling Authorized Dist. - M & M Control

      • Sterlco Sterling Authorized Dist. - M & M Control
        Calibrators

      • United States of America Address: 24418 West Old Monaville Rd., Lake Villa, Illinois, United States of America

      Company Overview

      Sterling Sterlco was founded in 1916 and distributes under M&M Control Service, Inc. is a specialist in industrial control units. Industrial control units are in two basic varieties: steam control family and temperature control units. Steam Control units include steam traps, Y strainers, temperature control valves, hand radiator valves, boiler feed pumps, condensate pumps, and centrifugal pumps. Temperature control units include portable chillers, central chillers, and water and oil temperature control units. Additionally, Sterling also manufactures pump tanks.

    • Tri-State Instrument Laboratory

      • Tri-State Instrument Laboratory
        Calibrators

      • United States of America Address: 6801 E. 15th Street Tulsa, Oklahoma, United States of America

      Company Overview

      Tri-State Instrument Laboratory was established in Tulsa, Oklahoma in 159. Tri-State is a distributor and provider of calibration and related services. Tri-State also manufacturers voltage dividers, motor rotation indicators, and phase sequence indicators. Calibration services include calibration of various types off multimeters, clamp meters, electrical and resistance testers, power recorders, loop, process, and temperature calibrators, infrared and contact thermometers, and analog and digital panel meters. In addition to calibration services, Tri-State specializes in meggers, process calibrators, clamp meters, thermometers, multimeters, and other products such as digital counters, ,hour meters, and hard cases.

    • AppMet, Inc.
      • United States of America Address: 7308 Peppermill Pkwy, North Charleston, South Carolina, United States of America

      Company Overview

      AppMet, Inc was founded in 1993 in North Charleston, South Carolina. AppMet is a calibration and testing company offering dimensional, physical & mechanical, and electronic & electrical calibration services in climate-controlled laboratories as well as on-site calibrations when possible. AppMet is ISO/IEC 17025 as well as Full Service ISO-99001 certified. Electronic calibrations are made with all types of electrical and electronic test equipment from analog multimeters to RF spectrum analyzers. Physical and mechanical calibrations and tests are performed with equipment ranging from analytical balances to vacuum gages. Dimensional calibrations are performed with equipment ranging from 1-2-3 blocks to angle plates to thickness gages.

    • Isotech North America
      • United States of America Address: 158 Brentwood Drive, Unit #4 Colchester, Vermont, United States of America

      Distributor Overview

      Isotech North America., founded in the United States in 1994, is a supplier of precision temperature calibration equipment. The company offers a range of data logging solutions for tracking and documenting temperature measurements, devices for simulating RTD and thermocouple outputs for calibration and testing, high-accuracy reference thermometers for precision measurements, precision dry block calibrators for on-site and laboratory temperature calibration, and a range of calibration baths for accurately calibrating temperature sensors and thermometers.

    • Transmille Calibration
      • United States of America Address: 158 Brentwood Drive, Unit #4, Colchester, Vermont, United States of America

      Distributor Overview

      Transmille Calibration is a Colchester, Vermont-based distributor of calibration equipment that was established in 2010 as the American sales office for the British company Transmille Ltd. The company stocks various TRANSMILLE branded products including multi-product calibrators, electrical test calibrators, precision digital multimeters, and calibration software suites. The company is certified to ISO 9001 and ISO 17025 standards, and offers calibration and repair services to its clients in the medical, electronics, energy, and metrology industries.

    • Tacuna Systems
      • United States of America Address: 1100 Johnson Rd., Unit 17364, Golden, Colorado, United States of America

      Distributor Overview

      Tacuna Systems was founded in 2011 and centered in Golden, Colorado. Tacuna Systems provides in-house custom designs for signal conditioners, amplifiers, and other strain gauge load cell technology used across numerous industries. Tacuma Systems’s load cell products include load pins, planar beams, tension links, torqure transducers, load cell kits, and load cell calibration services. Additional products include calibration weights, scale parts and accessories, summing junctions, and other hardware, accessories, and wireless components. Tacuna Systems also provides services including load measurement consulting, system calibrations, custom signal conditioning & electronics, and custom scale design.

    • ARCO Engineering, Inc.
      • United States of America Address: 3317 Gilmore Industrial Blvd, Louisville, Kentucky, United States of America

      Distributor Overview

      ARCO Engineering was founded in Louisville, Kentucky in 1954. ARCO Engineering, Inc. is a distributor of Pressure, Temperature and Liquid Level instruments, instrument valves, heat trace, comfort heaters, and safety relief valves. ARCO Engineering specializes in products for the natural gas, process, chemical, power, wastewater and OEM markets. ARCO Engineering offers many types of parts including calibration instruments, hand valves, thermocouples, digital meters, drive pressure gauges, respirators, jet pumps, and pressure relief valves.

    • AndroTec GmbH
      • Germany Address: Hauptstraße 186 Waldfischbach-Burgalbe, Rhineland-Palatinate, Germany

      Manufacturer Overview

      AndroTec GmbH was established in 2000 in Waldfischbach-Burgalben, Germany, as a manufacturer of laser-based positioning and surveying technologies, as well as software and hardware development. The company offers various products, including Structor STR-60, Metor MTR-55R, Metor MTR-65RGL, Metor MTR-85R/RLL, and Metor MTR-95RG/RF. Offering specialized services, the company excels in crafting custom automation, mobile robotics solutions, and developing bespoke hardware and software. The products stand out by delivering customized solutions for automation, mobile robotics, and rapid line detection. The company serves various industries, including construction, manufacturing, technology, robotics, and logistics.

    • HT Italia S.r.l.
      • Italy Address: Via della Boaria, 40 Faenza, Italy

      Manufacturer Overview

      HT Italia S.r.l., established in 1983 and based in Faenza, Italy, is a manufacturer of test and measurement instruments. The company designed and built MASTER HT2031 in 1992, a product performing safety testing on installations and simultaneously printing a professional report thanks to the built-in printer. From then on, it has built a product portfolio consisting of infrared cameras, environmental measurement instruments, photovoltaic testers, power quality analyzers and digital multimeters. The company has acquired the quality system certification ISO 9001, and supplies its safety testers with calibration certificates made with calibrating equipment traceable to SIT or NAMAS.

    • Microtech Gefell GmbH
      • Germany Address: Georg-Neumann-Platz ,Gefell, Thüringen, Germany

      Manufacturer Overview

      Microtech Gefell GmbH, founded in 1928, is a manufacturer of microphones and acoustic systems based in Gefell, Germany. The company’s product range includes modular microphone systems and moving-coil capsule electrodynamic transducers. Other products include small and large diaphragm capsule transistor and tube pre-amplifiers. In addition, the company offers various measurement devices, such as calibrators, conditioning modules, and sound intensity probes. These products find applications in recording studios, mobile sound reinforcement, and fixed installations in conference venues, parliaments, and many more. The company also offers a number of services, including acoustic tests and calibration.

    • Casella CEL, Inc.
      • United Kingdom Address: Wolseley Rd, Kempston, Bedford, Bedfordshire, United Kingdom

      Manufacturer Overview

      Casella CEL, Inc., founded in the UK in 1799, is a manufacturer of occupational and environmental monitoring equipment for the benefit of workers'​ health. The company's product portfolio includes noise monitoring, dust monitoring, vibration monitoring, perimeter monitoring, and boundary monitoring solutions. The company serves industries such as manufacturing, construction, mining, and public facilities to assess exposure levels to improve worker and community health. It uses eminent figures including David Livingstone and Charles Darwin with instrumentation for exploration and scientific work.

    • Cirrus Research plc
      • United Kingdom Address: Acoustic House Bridlington Road Hunmanby, North Yorkshire, United Kingdom

      Manufacturer Overview

      Cirrus Research plc is a manufacturer of noise measurement instruments. Established in 1970, the company is headquartered in Hunmanby, United Kingdom. The company's main activities encompass designing and producing noise measurement and monitoring instruments. Its product range includes noise nuisance recorders, environmental noise monitors, vibration meters, sound level meters, noise dosimeters, and noise measurement software. The company serves industries such as environmental, occupational health, and construction and its applications include Noise At Work, Environmental, and Noise Nuisance. Cirrus Research offers services like calibration and technical support.

    • Metra Mess- und Frequenztechnik in Radebeul e.K.
      • Germany Address: Meissner Str. 58 Radebeul, Freistaat Sachsen, Germany

      Manufacturer Overview

      Metra, established in 1944 and headquartered in Radebeul, Germany, is a manufacturer of piezoelectric vibration sensors and related instruments. The company manufactures vibration sensors, signal conditioners, vibration calibrators, and vibration meters. It also makes charge amplifiers, piezoelectric accelerometers, and cables and accessories. It sells its products to reputable companies like Audi AG, BMW AG, and Intel. In 2019, it introduced an integrated management system, which was certified according to DIN EN ISO 9001:2015 in the same year.

    • Liaoning Huake Petroleum Apparatus Science & Technology Co., Ltd.
      • China Address: No.57 Nanwu Road, Heping District, Shenyang City, Liaoning, China

      Manufacturer Overview

      Liaoning Huake Petroleum Apparatus Science & Technology Co., Ltd., established in 2009 and based in Liaoning Province,China, is a manufacturer of petroleum products apparatus & glassware. The company products include Fast nalyser, lab general device, thermometer and hydrometer. It has attained ISO9001:2008 certification.The company also holds CCS CE certificate. The company manufactures testing equipment and instruments for the petrochemical sector in compliance with ASTM, GB/T, and SH/T standards. The goods are sold in Numerous local and international markets, including those in Russia, Germany, France, and America.

    • RAD Torque Systems
      • Canada Address: 100-30722 Marshall Rd, Abbotsford, British Columbia, Canada

      Manufacturer Overview

      RAD Torque Systems, launched in 1994 in Abbotsford, BC, is a manufacturer of battery-powered, pistol grip, and pneumatic wrenches for wind energy, petrochemical, aerospace, and manufacturing industries. The company's product catalog includes RAD pneumatic, E-RAD blue series, E-RAD batteries, audit equipment, and V-Rad electric series, which are built in compliance with the CSA/CE/UL safety standards. The company also provides protective accessories such as trigger stops, hand guards, and extensions for the safety of workers.

    • Oetiker Limited
      • Switzerland Address: Spätzstrasse 11 Postfach 358 Horgen, Zürich, Switzerland

      Manufacturer Overview

      Oetiker Limited, founded in 1942 and located in Alliston, Ontario, is a manufacturer of custom clamps, rings, straps, and quick-connectors.                                                       Their selection of products includes ear clamps, strap clamps, tank straps, powertrain straps, and valve quick connectors. These products are used for secure connections, bundling solutions, and fastening capabilities for applications in fluid and air systems. The company’s products cater to general industries such as automotive, industrial, plumbing, HVAC, and general manufacturing.

    • GIUSSANI S.R.L.
      • Italy Address: Via dei Crederi, 411 24045 - Fara Gera d'Adda Bergamo, Italy

      Manufacturer Overview

      GIUSSANI S.R.L., founded in 1947 and headquartered in Bergamo, Italy, is a manufacturer of glass thermometers with electronic contacts, relays, and amplifiers. The company offers a range of products, including thermostatic calibrators, manual pressure generators, sanitary tap test benches, endurance test benches, and laboratory tables, and trolleys with universal supports. It also provides calibration and repair services, hydraulic laboratory tests, rental services for portable instruments, and second-hand thermostatic calibrators. These instruments are used in various applications, including the drying of Italian pasta and, more generally, in process control.

    • Electronic Temperature Instruments Ltd.

      • Electronic Temperature Instruments Ltd.
        Calibration

      • United Kingdom Address: Easting Close, Worthing, West Sussex BN14 8HQ, United Kingdom

      Manufacturer Overview

      Electronic Temperature Instruments (ETI) Ltd., established in 1983 and headquartered in West Sussex, England, is a manufacturer of digital thermometers. The company offers a range of products including thermometers, data loggers, probes and accessories, calibration equipment, cooking and BBQ tools, and more. It also offers moisture meters, pH meters, pressure meters, electrical testers, and gas detectors. The company is certified with the ETL Listed Mark, which is proof of product compliance with North American safety standards. It serves industries such as the food industry, industrial and manufacturing, healthcare, environmental monitoring, and more.

    • SIKA Dr. Siebert & Kühn GmbH & Co. KG
      • Germany Address: Struthweg 7-9, Kaufungen, Hesse, Germany

      Manufacturer Overview

      SIKA Dr. Siebert & Kühn GmbH & Co. KG, established in 1901 in Germany, is a manufacturer of industrial measuring and calibration technology. The company has a wide product range that includes dial thermometers, digital thermometers, temperature sensors, digital pressure gauges, and turbine flow sensors. SIKA's products are used or fitted by device manufacturers and can be found in the products or production processes of numerous markets, such as heating, ventilation, automotive engineering, and commercial vehicle construction, as well as industrial technology. SIKA offers customized design, engineering, and mass production of its technology to meet client-specific requirements.

    • LNI Swissgas
      • Switzerland Address: Route des Fayards 243, Versoix, Geneva, Switzerland

      Manufacturer Overview

      LNI Swissgas, established in 1974 in Switzerland, is a manufacturer and supplier of high-precision gas generators and calibration systems. The company specializes in solutions for gas generation and analysis, catering to industries such as environmental monitoring, industrial processes, and laboratories. Devoted to providing gas solutions, LNI Swissgas offers a diverse range of gas generators, calibration standards, and analyzers. This ensures precise gas control for critical processes in laboratories, research institutions, and industrial facilities. LNI Swissgas's devotion to technological excellence is evident in their cutting-edge products, positioning them as a dependable provider of advanced gas solutions.

    • Pulsar Instruments
      • United Kingdom Address: Unit 2 Hunmanby Industrial Estate Hunmanby Filey YO14 0PH, United Kingdom

      Manufacturer Overview

      Pulsar Instruments Plc is a British manufacturer specializing in noise measurement equipment established in 1969 and based in Yorkshire, England. The company produces various sound level meters, vibration meters, and acoustic calibrators for monitoring or measuring noise levels. It also offers personal noise exposure meters, noise activated warning signs that signal when wearing hearing protection is necessary, and audiometry equipment for hearing screening purposes. The company provides various training courses, as well as product recalibration and equipment rental services.

    • Tes Electronical Electronic Corp
      • Taiwan Address: No. 31, Lane 513, Ruiguang Rd, Neihu District, Taipei City, Taiwan

      Manufacturer Overview

      Tes Electrical Electronic Corp., founded in 1988 and based in Taipei, Taiwan, is a manufacturer of test instruments that are sold worldwide. Its products include digital earth testers, LAN cable meters, micro-ohmmeters, power analyzers, and battery capacity testers, used in various areas, including clean room inspection, measuring electrical energy waste, evaluating solar system performance, light testing, and monitoring exposure levels of noise. The company has an annual revenue of 10 million USD. It is ISO 9002 certified, and its calibration laboratory is TAF (Taiwan Accreditation Foundation) and ilac-MRA accredited.

    • Opto GmbH
      • Germany Address: Lochhamer Schlag 14 D- 82166, Graefelfing, Germany

      Manufacturer Overview

      Opto GmbH was established in 1980 and is based in Graefelfing, Germany, is a manufacturer of compact imaging modules for industrial and medical applications. The company provides Opto viewer, applications software, OEM imaging modules, multi-fluorescence-microscopes, and, LED illuminations for the test & measurement, life science, research, and, medical markets. They optimize and supplement microscopes in coordination with the manufacturer to enable new set-ups and demanding inspection tasks as well as offer onsite designing services to device developers, machine builders, and OEMs according to the optical requirements of clients.

    • Zumbach Electronics Corp.
      • Switzerland Address: Hauptstrasse 93 Orpund, Bern, Switzerland

      Manufacturer Overview

      Zumbach Electronics Corp., founded in 1957, is a manufacturer of on-the-line measuring, monitoring and control systems. The company in Hauptstrasse, Orpund Schweiz, offers maintenance, repair and calibration, training, support & consultation, and spare part delivery. They have 11 international subsidiaries and representatives in 40+ countries. Their products include a Laser surface velocimeter, KW fault detector, MSD led device, Steelmaster, and calibrator. These are used in wire & cable, rubber, steel cold or hot, optical fibre, non-ferrous and plastic industries.

    • burster präzisionsmesstechnik gmbh & co kg
      • Germany Address: Talstr. 1-5 , 76593 Gernsbach, Baden-Württemberg, Germany

      Manufacturer Overview

      Burster Präzisionsmesstechnik GmbH & Co KG is a manufacturer of sensors & precision measurement products established in 1961 and based in Gernsbach, Germany. The company produces a wide range of sensors, calibration equipment, and testing devices. Its products include force and displacement monitoring systems, universal calibrators for in-field QA operations, and potentiometric angle of rotation sensors. The company also offers contract manufacturing, OEM, and product modification services. It chiefly serves clients in the automation, chemical processing, and industrial facility engineering sectors.

    • Time Electronics Ltd.
      • United Kingdom Address: Unit 5, TON Business Park, 2-8 Morley Road, Tonbridge, Kent, TN9 1RA, United Kingdom

      Manufacturer Overview

      Time Electronics Ltd., established in 1967 and located in Tonbridge, England, is a manufacturer that designs and manufactures calibration and metrology instruments. The company offers a range of precision test instruments for calibration, including decade boxes, portable voltage, and current calibrators. It also provides electrical multifunction calibrators, ATE/bench calibrators and multimeters, and electrical test equipment calibrators. It offers a compact working environment to cover multiple applications in test and measurement with its CalBench system. Moreover, the company is accredited to ISO 9001:2008. It serves various industries, including electronics, aerospace and aviation, industrial sectors, and music.

    • Lorenz Messtechnik GmbH
      • Germany Address: Obere Schlossstrasse 127/129/131 Alfdorf, Germany

      Manufacturer Overview

      Lorenz Messtechnik GmbH, established in 1985 and headquartered in Alfdorf, Germany, is a precise sensor for torque and force measurement manufacturer and supplier. The company's products include non-rotating reaction sensors, tension and compression sensors, and electric motor test rigs. It also supplies sensor interfaces, built-in portable measuring devices, and systems. These products are used in laboratory and industrial testing scenarios. The company also provides customized system solutions and test benches for the acquisition of speed, torque, and force characteristics, and offers proprietary calibrations for all sensors and devices.

    • KISTERS
      • Germany Address: Pascalstraße 8+10 Aachen, Germany

      Manufacturer Overview

      Kisters is a developer and manufacturer of hardware, software, and IT products for environmental monitoring applications established in Aachen, Germany, in 1963. The company’s software products include its Embedded Engineer-branded platform for generating ANSI C or C++ code from unified modeling language (UML) structures, and its LemonTree-branded utility for streamlining the workflow of modeling teams. It also offers instruments and equipment for monitoring environmental parameters such as sensors and transmitters. The company operates internationally with its North American subsidiary, Kisters North America, headquartered in Florida, USA.

    • Meatest, spol. s r.o.
      • Czech Republic Address: Železná 509/3, Brno-jih, Czech Republic

      Manufacturer Overview

      Meatest, established in 1991 and headquartered in Jihomoravský, Czech Republic, is a manufacturer of electrical calibration equipment. The company’s product range encompasses multi-product calibrators, power & energy calibrators, and calibration software. It specializes in electrical calibration and develops instruments tailored for calibration laboratories and testing facilities across various sectors, including electronics, engineering, and telecommunications. Its calibration lab ensures traceable calibrations for all equipment registered with the Czech Metrology Institute. The company’s notable clients include Samsung, Siemens, and Volkswagen.

    • Chroma ATE Inc.
      • Taiwan Address: 88 Wenmao Road, Guishan District, Taoyuan City, California, Taiwan

      Manufacturer Overview

      Chroma ATE Inc., established in 1984, is an instrument manufacturer and supplier based in Taoyuan City, Taiwan. Operating under the Chroma brand, the company provides electronic test and measurement equipment for automated optical inspection, flat panel display validation, electric vehicle component testing, and electrical safety device assessment. This equipment is also utilized for energy storage systems (ESSs) and power conversion systems (PCSs) verification, light-emitting diode (LED) and driver analysis, passive component testing, and photovoltaic inverter validation. The company also provides intelligent manufacturing execution systems (MESs). Furthermore, the company operates a laboratory, certified to perform alternating current (AC)/direct current (DC) and resistance calibration.

    • Yokogawa Test & Measurement Corporation
      • Japan Address: 4-9-8 Myojin-cho, Hachioji-shi, Tokyo, Japan

      Manufacturer Overview

      Yokogawa Test & Measurement Corporation was founded in Japan in 1954. Yokogawa currently serves a wide array of industries including the aerospace, automotive, consumer electronics, semiconductor and telecommunications industries with both hardware and software solutions. Among Yokogawa’s suite of products are oscilloscopes, voltage probes, power analyzers and meters, data acquisition tools, optical test equipment, a wide variety of handled meters, calibrators, and testers; analog instruments, and manometers.

    • Tokyo Measuring Instruments Laboratory Co., Ltd.
      • Japan Address: 8-2, Minami-Ohi 6-chome, Shinagawa-ku, Tokyo, Japan

      Manufacturer Overview

      Established in 1954, Tokyo Measuring Instruments Laboratory Co., Ltd. (Tokyo Sokki Kenkyujo Co., Ltd.) is a manufacturer headquartered in Tokyo, Japan, specializing in stress measurement equipment. The company has developed a wide range of strain gauge transducers, essential components for stress measurement in general and civil engineering. The company also produces other instruments, such as the portable digital strainmeter for automatic multi-point measurements. With overseas representative offices in China, Germany, and 43 other countries, TML serves global customers, providing solutions for the safety and efficiency of structures.

    • Ono Sokki
      • Japan Address: 3-9-3 Shin-Yokohama, Kohoku-ku, Yokohama , Kanagawa, Japan

      Manufacturer Overview

      Ono Sokki Co. Ltd., founded in 1954 and based in Yokohama, Japan, is a manufacturer, distributor, and supplier of electronic measuring instruments and control systems. Its products include sound level meters, vibration meters, and FFT analyzers, utilized in research and development, quality control, and by production line engineers, particularly in the automotive industry. The company was the first to be designated by the government as a producer of sound level meters in Japan and also obtained ISO 14001 certification in 1997.

    • CHINO
      • Japan Address: 32-8, KUMANO-CHO, ITABASHI-KU, Tokyo, Japan

      Manufacturer Overview

      Chino, headquartered in Tokyo, Japan, is engaged in the manufacture and sale of measurement and control equipment and instrumentation work. The company was founded in 1936 as Chino Seisakusho. Chino operates in the area of "measurement, control, and monitoring" and contributes to the development of all industrial fields. Major products include recorders, regulators, temperature sensors, data loggers, radiation thermometers, thermal image measuring devices/thermal cameras, composition meters, moisture meters, thickness meters, thyristor regulators, and fuel cell evaluation and testing devices.

    • RION Co., Ltd.
      • Japan Address: 3-20-41 Higashimotomachi, Kokubunji, Tokyo, Japan

      Manufacturer Overview

      Founded in 1944, Rion Corporation, based in Tokyo's Kokubunji City, is a precision equipment manufacturer. It specializes in three main sectors: environmental measurement instruments for noise and vibration analysis, medical equipment for hearing tests and hearing aids, and particle counters for semiconductor and pharmaceutical cleanliness measurement. Rion boasts significant market share in Japan, driven by its advanced technology and service excellence. In environmental measurement instruments, it offers noise meters, vibration meters, and frequency analyzers. In 2022, Rion expanded its environmental division by acquiring Norsonic AS, a prominent noise meter manufacturer. The company caters to diverse customers worldwide, including government agencies, research institutions, manufacturing industries, and R&D departments. With eight subsidiary companies (five in Japan and three overseas) and a global agent network spanning approximately 60 countries, Rion Corporation maintains a strong global presence.

    • Peak Technology
      • India Address: 4d, kh. no. - 47/19/5,d - block, industrial area,hastsal,uttam nagar, new delhi, India

      Manufacturer Overview

      Peak Technology is an Austrian ISO 9001 certified manufacturer of precision motorsport and space exploration components that was established in Graz in 1988. The company produces various motorsport components, such as suspension parts and brake discs, as well as elements for improving aerodynamics (e.g. wing spoilers). It also offers composite high pressure tanks for space or terrestrial use, and custom composite structures fabricated from different compounds or alloys. Peak Technology chiefly serves its clients in the space exploration and motorsport industries, including companies such as Airbus Defence & Space and the Red Bull Racing F1 Team.

    • Transmille Ltd
      • United Kingdom Address: Unit 4, Select Business Centre, Lodge Road, Staplehurst, KENT, United Kingdom

      Manufacturer Overview

      Transmille Ltd is a British manufacturer of metrology calibration equipment that was established in Kent, United Kingdom in 1997. The company’s product lineup includes calibrator references and standards, precision multimeters, standard and portable electrical testing equipment, and calibration software for automating calibration processes. It also offers consultation and technical support services, as well as legacy parts or components for portfolio items no longer in production. Transmille products are used mainly by its clients in public utilities, as well as in Britain’s defense, aerospace, and industrial manufacturing sectors.

    • TIS Instruments Pte Ltd.
      • Singapore Address: 8 Tradehub 21, #06-16 Boon Lay Way, Singapore, Singapore

      Manufacturer Overview

      TIS Instruments Pte Ltd (TIS) is a Singaporean designer and manufacturer of pressure calibration and measuring equipment that was established in 1999. The company’s specialized product lineup includes digital, pneumatic, and hydraulic deadweight testers, as well as pressure calibrators, gauges, and transducers. It also offers temperature and signal calibrators for current, thermocouples, and thermistors. TIS operates internationally, serving clients in the oil and gas, aerospace, and metrology sectors including companies such as BP, Singapore Airlines, and Chevron.

    • Sansel Instruments And Controls
      • India Address: No. 1/46, Ganga Nagar, M. M. D. A. Colony, Maduravoyal, Chennai, Tamil Nadu, India

      Manufacturer Overview

      Sansel Instruments and Controls is an Indian ISO 17025 certified manufacturer of calibration equipment and instrumentation established in 2000 and based in Chennai, Tamil Nadu. The company produces measurement, calibration, and monitoring equipment such as pH sensors, temperature calibrators, data loggers, and colony counters. Its products are used for precision analysis, measurement, and monitoring of sensitive processes and materials. The company primarily serves pharmaceutical companies, research laboratories, chemical processors, and automotive manufacturers.

    • Beamex
      • Finland Address: Ristisuonraitti 10, Pietarsaari, Finland

      Manufacturer Overview

      Beamex, founded in 1975 in Finland, is a manufacturer and supplier of calibration solutions and services. The company’s comprehensive range of products includes portable calibrators, calibration software, temperature calibration equipment, pressure calibration equipment, and more. These offerings find applications in industries like pharmaceuticals, energy, manufacturing, and food processing. Tasked with enhancing precision and accuracy, Beamex provides convenient calibration solutions that ensure the integrity of measurement processes. With a global existence and an aim for customer satisfaction, Beamex continues to play a vital role in improving measurement accuracy and efficiency across various industries.

    • SPEKTRA
      • Germany Address: Heidelberger Str. 12 DE Dresden, Freistaat Sachsen, Germany

      Manufacturer Overview

      SKEPTRA, founded in 1994, is a manufacturer of components and systems for the testing and calibration of sensors for sound and vibration engineering. Based in Coschütz/Gittersee, Germany, the company manufactures calibration solutions, engineering solutions, and structural testing. They expanded in 2008 by acquiring APS Dynamics, Inc. USA, where they ventured into manufacturing ultra-low frequency vibration exciters. Their products and services are used in aviation, seismology, motor vehicle monitoring, vibration test systems, crash test, and the automotive industry. DAkkS accredit the company for calibration laboratory and ISO 17065 for manufacturing sound level meters and sound calibrators.

    • Endress+Hauser
      • Switzerland Address: Kägenstrasse 2 Reinach BL, Basel, Switzerland

      Manufacturer Overview

      Endress+Hauser Group is based in Switzerland and has over 15,000 employees worldwide. Endress+Hauser manufactures measurement instrumentation and provides services for industrial process engineering. Endress+Hauser’s customers come from various industries including chemical, life sciences, energy, and water. Endress+Hauser’s products include those for level measurement, pressure measurement, software, industrial communication technologies, and liquid analysis. Endress+Hauser also offers services including project and commissioning, support and education, maintenance, and performance optimization. The company has an assortment of online tools to assist customers in services such as product selection.

    • Acoem

      Manufacturer Overview

      Acoem, started in 2011 and headquartered in Limonest, France, is a manufacturer of environmental monitoring, industrial reliability, and security equipment and has 12 legacy brands, including Metravib, ecotech, and FixturLaser. Its products include opacity monitors, machine tool measuring equipment, and acoustic threat detectors, used in several sectors like scientific research, industrial processes, and construction. It also provides software for data collection, machinery diagnostics, and predictive maintenance. The company has eight manufacturing facilities and five research and development centers in 11 countries. Its turnover is €140m, and it has over 200 distributors worldwide.

    • Chotest Technology Inc.

      Manufacturer Overview

      Chotest Technology Inc., founded in 2005, is a manufacturer of precision measuring instruments headquartered in Shenzhen, China. The company offers a range of high-precision measuring equipment, including White Light Interferometer SuperView W1, Laser Tracker GT series, universal length measuring machines, laser interferometer SJ6000, and profilometers SJ5700 series. Its products are manufactured in accordance with ISO9001 and 6S standards, ensuring quality products for its customers. The company's precision measuring equipment is used in various industries, including government metrology and quality inspection agencies, automotive, aerospace, and machinery. Its instruments are employed for accurate measurements in quality control and industrial applications.

    • Vaisala Oyj

      Manufacturer Overview

      Vaisala, established in 1936 in Finland, is a technology company that is a manufacturer of electronic measurement systems and equipment for meteorology, environmental sciences, traffic safety, and industry worldwide. The Company's products include radiosondes, barometric pressure measurements, weather stations, lighting detection systems, and moisture measurement solutions. Vaisala also sells a large selection of its products directly to consumers via the company's online store. The company also provides commercial clients with the XWeather subscription service, which offers numerous options for industrial-grade environmental measurement.

    • ICP DAS Co., Ltd.

      Manufacturer Overview

      ICP DAS Co. Ltd., established in 1993 and headquartered in Hsinchu County, Taiwan, is a manufacturer of automation products and solutions. Operating in over 100 countries, the company is engaged in developing a wide range of products, including remote I/O controllers, distributed I/O modules, I/O data acquisition boards, programmable automation controllers, and industrial communication modules. The company provides its services in several regions such as the United States, Europe, and China, ensuring its products meet the needs of a global industrial automation clientele.

    • Multitek Technologies

      Manufacturer Overview

      Multitek Technologies, established in 1994 and headquartered in New Delhi, India, is a manufacturer and supplier of metrology and metallurgical equipment and solutions. The company supplies machines and equipment for materialography, metallography, and hardness testing. Its products include cutting machines, hardness testers, and vision inspection systems. The company’s NABL-certified lab provides calibration services for pressure gauges, torque wrenches, and thermometers. Its products and solutions cater to diverse sectors, including automobiles, healthcare testing labs, and industrial engineering.

    • Buck Research Instruments, LLC

      • Buck Research Instruments, LLC
        VAPORTRON

      Manufacturer Overview

      Buck Research Instruments LLC, established in 1989 and headquartered in Aurora, Colorado, United States, is a manufacturer of precision humidity measurement devices and equipment. The company's products include a range of high-performance chilled mirror hygrometers that are used in laboratories, aerial research, and industrial processes to accurately measure humidity. It welcomes inquiries for custom equipment design and manufacture. It serves industries that include pharmaceutical production, aircraft manufacturing, and fuel cell production. Its notable clients include NASA and the United States Air Force.

    • Baker Hughes Company

      Manufacturer Overview

      Baker Hughes Co. (BHC) is an American service provider and manufacturer of industrial oilfield equipment that was established in 1987 following the merger of Baker International and Hughes Tool Company. Based in Houston, Texas, the company produces several categories of oilfield products including drilling equipment, pipe and subsea production systems, generators, and storage systems. It also offers process control components and actuators such as pumps, valves and regulators. BHC provides various services for oilfield and liquefied natural gas (LNG) operations, including regasification, well construction, transportation, and storage.

    • Pfeiffer Vacuum, Inc.

      Manufacturer Overview

      Founded in 1890 and is currently holding the ISO/IEC 17025:2005 certification, Pfeiffer Vacuum, Inc. is a supplier and manufacturer of standard and custom leak, flow testing instruments and devices. Their extensive product line includes flow calibration equipment, non-destructive leak testing software, pressure or vacuum-based instruments, and test stations and stands. Pfeiffer Vacuum Inc. offers all types of vacuum applications and serves various industries, including automotive, aerospace, electronics, military, pharmaceutical, medical, oil and gas, and HVAC.

    • Manufacturer Overview

      Time Electronics USA founded in 1967 and based in the U.S.A., is a manufacturer of calibration and metrology instruments for various industrial applications. The company's product chart consists of electrical calibrators, digital multimeters, process calibrators, and, pressure testing instruments, and calibration software that have a wide range of applications in the automotive, aerospace, mining, metrology, and, electronics industries. The company also manufactures customized multifunction test benches as well as designs and supplies turnkey calibration labs, electrical and instrument workshops, and engineer training centers.

    • Hottinger Brüel & Kjær

      Manufacturer Overview

      HBK, formerly named HBM, is a global ISO9001 and ISO14001-certified company founded in 1950. It is known for providing the best technology and expertise in test and measurement. With branches in 30 countries, it provides clients with different solutions ranging from sound and vibration to propulsion efficiency and weighing. Examples of product offerings include transducers, amplifiers, sensors, strain gauges, data acquisition systems, etc. Such products are used in different markets, including aerospace, automobiles, telecom audio, and more. Besides supplying products, they also entertain their customers with after-sales services.

    • Manufacturer Overview

      OMEGA Engineering inc. founded in Singapore, in 1962, is a manufacturer of measurement and control equipment. Products offered by the company are thermocouple probes, pressure gauges, air velocity measurement systems, and data loggers. It sells 165,000 products that are certified by ISO-9001 and EU. Its pH probes provide accurate measurements under conditions that often render conventional pH probes useless. The company also provides custom-engineered products to its customers. It has a connected distribution network in Asia.

    • AMETEK Sensors, Test & Calibration

      Manufacturer Overview

      AMETEK Sensors, Test & Calibration, founded in 1961 and based in Massachusetts, USA, is a manufacturer, distributor, and supplier of instruments and process control solutions for advanced manufacturing processes. The company provides a range of standard and customized solutions for various industries such as calibration, temperature measurement, and weighing solutions. Its products are constantly used throughout the oil and gas, power, and wastewater industries, helping to save and produce energy, ensure safety in hazardous areas, and control temperatures.

    • Sturtevant Richmont

      Manufacturer Overview

      Sturtevant Richmont is a manufacturer established in 1940 with its headquarters in Chicago, Illinois, specializing in torque tools and precision measurement equipments. Their product range includes torque wrenches, screwdrivers, torque testers, and calibration equipments. These tools are widely used in automotive, aerospace, energy, manufacturing, and maintenance sectors for assembly operations, and quality control. Sturtevant Richmont holds certifications such as ISO 9001 and ISO 17025, ensuring in delivering tools that meet the demanding standards of modern industries.

    • Edgetech Instruments, Inc.

      Manufacturer Overview

      EdgeTech traces its roots back to 1965 in Massachusetts and currently operates both out of West Wareham, Massachusetts, and Boca Raton, Florida. The company is a manufacturer of underwater technology solutions including sonar, bathymetry, and other technologies. These solutions are often used in hydrographic surveys, retrieval situations, offshore energy, and underwater research applications. Among the company’s product lines are Sonar solutions, custom-engineered products, acoustic releases, and motion reference units. They can be used to survey pipelines, discover shipwrecks, measure river flow, and locate shallows among other uses.

    • MULTI MEASURING INSTRUMENTS Co., Ltd.

      • MULTI MEASURING INSTRUMENTS Co., Ltd.
        Calibrators

      • Japan Address: 7F Akihabara Murai Building, 1-26 Kandasakumacho, Chiyoda-ku, Tokyo, Japan

      Company Overview

      Multi Measuring Instruments Co., Ltd. was founded in Chiba, Japan in 1986 and is headquartered in Tokyo. As per its namesake, Multi offers a vast array of measuring and testing equipment used across a number of industries. Some of their offerings include voltage meters, network testers, lux meters, cable locators, sound meters, various thermometers, gas analyzers, and water quality meters. Multi Measuring Instruments has a mission for its products to improve the global environment by detecting inefficiencies and leaks, developing products that will be useful for solar and wind power generation.

    • CleanAir
      • France Address: 360 avenue de la Rasclave Z.I. Braye de Cau La Penne-sur-Huveaune, France

      Company Overview

      CleanAir is an ISO 45001-certified manufacturer of gas and air analysis products that was established in La Penne-sur-Huveaune, France, in 1972. The company mainly produces air samplers for collecting ambient air samples, gas analyzers for measuring process gasses or pollutants in samples, and various sensors for analyzing pressure, temperature, or gas leaks. It also offers consultation, rental, and maintenance services to customers requiring additional support. The company chiefly serves its clients in Europe’s industrial manufacturing, industrial processing, and environmental preservation sectors.

    • GRAS Sound & Vibration
      • Denmark Address: Skovlytoften 33, Holte, Denmark

      Company Overview

      GRAS Sound and Vibration, established in 1994 and based in Denmark, is a manufacturer of measurement microphones and acoustic equipment. The company is a part of the sound and vibration industry and they provide measurement applications and solutions for customers in the fiels of aerospace, automotive, audiology, and consumer electronics. GRAS does transactions through subsidiaries and distributors in more than 40 countries. Aside from manufacturing, the company also provides repair and calibration services for their clients with regards to their products.

    • SENECA srl
      • Italy Address: Via Austria, 26 Padova, Veneto, Italy

      Company Overview

      SENECA srl, established in 1986 and based in Via Austria, Italy, is a manufacturer and supplier of automation interfaces. Its product portfolio includes data acquisition, automation systems, industrial communications, remote control, power monitoring, and electrical measurement. They are used in multiple industries which include steel, water treatment, automotive, oil, gas, chemical, metal, and pharmaceutical. The company also offers automation solutions ranging from single components to the implementation of turnkey systems.

    • Hangzhou Zhongchuang Electron Co., Ltd.
      • China Address: No.3, Kangle Road, Gongshu District, Hangzhou, Zhejiang, China

      Company Overview

      Hangzhou Zhongchuang Electron Co., Ltd. was established in 2003 and is based in Hangzhou, China is a manufacturer and supplier of thermal inspection instruments and electronic products. The company’s product portfolio includes signal calibrators, signal generators, pressure calibrators, dry block calibrators, high voltage power supplies, high voltage transformers, and more. The thermal inspection instruments and electronic products are designed for various industrial applications and research purposes. The products are used in various industries such as electric power, petroleum, chemical, metallurgy, metrology, railway, and environmental protection.

    • Masibus
      • India Address: B-30, G.I.D.C Electronic Estate, Sector 25, Gandhinagar, Gujarat, India

      Company Overview

      Masibus Automation And Instrumentation Pvt. Ltd. (MAI) is an Indian manufacturer of industrial automation products that was established in Ahmedabad, Gujarat in 1975. The company produces various data acquisition systems such as 8-channel analog input and 8-channel relay output modules, process controllers, transducers, scanners, and indicators (e.g. bargraph, loop powered models). These are commonly used in industrial manufacturing, automation, packaging, and assembly operations. MAI is a business unit of the Sonepar Group, which is an independent B2B distributor of electrical products that operates internationally across Asia.

    • Mod-Tronic Instruments Limited

      • Mod-Tronic Instruments Limited
        Calibrators

      • Canada Address: 1 Delta Park Blvd #12 Brampton, Ontario, Canada

      Company Overview

      MOD-TRONIC Instruments Limited was established in 1972 in Brampton, Ontario, Canada. MTis a distributor of industrial sensors, transducers, heaters, controls, and instrumentation, primarily made in the USA as well as Japan, Switzerland, and Germany. MT’s customers are primarily in the aerospace, building automation, manufacturing, medical, military, oil and gas, and water treatment industries but also serves individuals. MT offers an above industry standard 5-year warranty and technical support on every product sold.

    • PCE Instruments UK Ltd
      • United Kingdom Address: Suite 2.08, Trafford House Chester Rd, Manchester M32 0RS, United Kingdom

      Company Overview

      PCE Instruments UK Ltd., started in 199 and headquartered in Manchester, UK, is a manufacturer and supplier of test instruments, equipment, and tools for weighing, measuring, and control systems. The company offers more than 500 test equipment, including analyzers, inspection cameras, meters, detectors, and sensors, with applications in various fields like data acquisition, electrical engineering, environmental science, building inspection, and food processing. Its manufacturing and development division is ISO 9001 certified, all its test instruments, equipment, and tools are factory calibrated, and the company also provides services for custom test instrument design, installation, and maintenance.

    • Furness Controls Limited
      • United Kingdom Address: Beeching RdBeeching Road Bexhill-on-Sea, East Sussex, United Kingdom

      Company Overview

      Furness Controls was founded over 50 years ago and is headquartered near Paris, France, with offices in the United Kingdom as well as Indian Trail, North Carolina in the United States. Furness Controls is a distributor of differential pressure, airflow, gas flow, and leak detection and test instruments for use in quality control and process control applications. Furness Controls serves several industries including aerospace, automotive, food & drink, plumbing, and medical. Furness Controls also offers repair and calibration services at its ISO/IEC 17025:2017 certified laboratory in North Carolina.

    • AOIP

      Company Overview

      AOIP was established in 1896 and is a manufacturer and distributor of test instrumentation and electrical motor control products based in Ris Orangis, Essonne, France. The company offers various products in the portofolio, such as precision documented multifunction calibrator, handheld thermometer for thermocouples, leakshooter camera, field pressure process calibrator, and programmable digital panel meter. The products are used in various industries such as cement, mining, water plants, manufacturing, and quarries. The company has been certified with ISO 9001:2015 on the design, production engineering, marketing, services, and trade of the instrumentation and motor starters products.

    • Electro-Technic Products, Inc.

      Company Overview

      Electro-Technic Products (ETP), established in 1942 and headquartered in Chicago, Illinois, is a manufacturer and distributor of handheld leak detectors, corona surface treaters, and non-destructive testing (NDT) equipment. The company’s product line includes bottle vacuum testers, leaks, pinhole/holiday detectors, corona/plasma surface treaters, and power supplies. ETP's offerings cater to industries seeking integrity testing for industrial linings, coatings, and plastic surfaces. It also provides educational products suitable for high school and college physics labs. It serves automotive, construction, medical devices, industrial linings and coatings, and aerospace industries.

    • Anger Associates Inc.

      Company Overview

      Anger Associates, Inc. was established in 1957 in the Detroit, Michigan area where it stands to this day. Anger Associates specializes in consulting, sales and support of measurement and calibration instrumentation, dynamic signal analysis tools and software, and complete test systems. Anger Associates serves many industries including automotive, pharmaceutical, and steel manufacturing. Anger Associates focuses on vehicle. Powertrain test systems, production test systems, torsional vibration analyzers, dynamic signal acquisition and analysis system and tools, field calibration instruments, calibration laboratory instruments including primary and working standards, pressure/vacuum and flow sensors and transducers, and mass flow meters & controllers.

    • B & B Instruments, Inc.

      Company Overview

      B&B Instruments (BBI) was incorporated in Indiana in 1972 and still operates out of Indianapolis, Indiana today. BBI is an authorized stocking distributor for manufacturers of measurement, control & calibration equipment for pressure, temperature, flow, humidity, & level instrumentation serving both startups as well as Fortune 500 clients in industries such as utilities, metals, food, process, industrial, OEMs, and technical. BBI’s product categories include calibrators, controllers, meters, flow, gauges, humidity, level, meters, pressure, switches, temperature, and transmitters. Featured products include Autrol Transmitters APPT-3100 Differential Pressure Transmitter, Barksdale’s UDS7 Series Solid State Pressure Switches, Kytronic’s actuator positioner, and Monarch DataChart’s DC1250 2-Channel Paperless Recorder.

    • Crane Electronics Ltd
      • United Kingdom Address: Sketchley Meadows Hinckley LE10 3EY, Hinckley, United Kingdom

      Company Overview

      Crane Electronics, Ltd., a company established in 1971 and based in Leicestershire, UK, manufactures digital torque wrenches, transducers, and testers for automotive, aerospace, construction, and other industries. One of its popular products is the IQWrench2 digital torque wrench, a torque with an integrated data collection system. This product is critical for industries that must ensure their components are tightened at the correct level and can be audited. The company's torque can perform several different measurement modes and algorithms. The company also provides service and calibration of its torque equipment outside the UK and USA to meet customers' demands.

    • FTI Flow Technology.

      Company Overview

      FTI Flow Technology, Inc., founded in 1963 and based in Tempe, Arizona, is a manufacterer of metering solutions. The company provides a diverse range of products, including magnetic flow meters, turbine flow meters, and ultrasonic flow meters whcih are widely utilized in mission-critical applications, particularly within the aerospace, military, and oil and gas markets. The company is registered with ISO 9001:2008 and AS9100C standards. Additionally, it holds accreditation from VLAP to ISO/IEC 17025:2005 for flow calibration services.

    • Indumart Inc.
      • Canada Address: 25 Denison Street, Markham, Ontario, Canada

      Distributor Overview

      Indumart Inc. is a company established in 1989 and based in Ontario, Canada, as a distributor of measuring and processing control instruments. Its product portfolio has diverse instruments such as transmitters, pressure gauges, temperature sensors, pneumatic controls, and level indicators. The company also distributes flow meters, calibrators, analytical indicators, paperless recorders, and contact pressure gauges. Its extensive portfolio caters to a wide range of industries, including chemicals, petrochemicals, food processing, wastewater treatment, and energy production industries across India, Canada, and the United States.

    • Monitran
      • United Kingdom Address: Monitor House, 33 Hazlemere Road, Penn, Buckinghamshire, United Kingdom

      Distributor Overview

      Monitran, a London-based supplier of advanced monitoring and measuring systems established in 1986, specializes in vibration and displacement sensors. They offer a wide range of solutions for industries such as manufacturing, energy, and transportation. Monitran's sensor options include accelerometers and velocity sensors, serving diverse applications in industrial processing, power stations, water treatment, wind turbines, mining, and the oil and gas industry. Additionally, Monitran provides project management services, delivering turnkey solutions that seamlessly integrate vibration sensors with monitoring and display hardware, complementing other sensor types and customer control systems.

    • GMS Instruments B. V.
      • Netherlands Address: Driemanssteeweg 190, 3084 CB Rotterdam, Netherlands

      Distributor Overview

      GMS Instruments B.V. is a supplier of measuring, regulating, and control instruments founded in 1971 and headquartered in Rotterdam, Netherlands. The company’s product line includes pressure and temperature gauges, level sensors, flow meters, gas detectors, and thermal cameras. It also provides spare parts, installation, maintenance, calibration, and certification services to its clients. The company supplies instruments sourced from brands like WIKA, Uniphos, Servomex, Siemens, and Tokico. It serves a wide range of customers, including those in the shipping, offshore, and industrial sectors.

    • Distributor Overview

      Bercu, founded in 1951 and based in Antwerp, Belgium, is a supplier of automotive instruments. The company supplies a wide range of products including calibrators, temperature simulators, infrared thermometers, panel meters, multimeters, and more. The company provides calibration and repairs for both handheld and control instruments as well as performing traceable calibrations on all types of instruments and devices. It also carries out calibrations for pressure gauges, ammeters, thermometers, tachometers, and other devices.

    • MSC Industrial Supply Co.

      Distributor Overview

      MSC Industrial Supply Co. is based in New York, New York, USA, and is a distributor and supplier of metalworking products as well as maintenance, repair and operations (MRO) equipment that was established in 1941 as a subsidiary of MSC Industrial Direct Co., Inc. The company primarily produces holemakers such as reamers and taps, milling equipment such as face mills and indexable inserts, and fixed abrasives such as wheels and belts. It also offers safety equipment such as respirators, reflective signage, and protective eyewear. The company’s products are mainly used in industrial manufacturing operations, with additional applications in construction.

    • MSI-Viking Gage, LLC

      Distributor Overview

      MSI-Viking Gage, LLC was founded over 50 years ago and is headquartered in Duncan, South Carolina. MSI-Viking provides manufacturing support to the automotive, aerospace, metals, plastics, medical, energy, food & beverage, and machining industries. MSI-Viking product offerings include 3D scanning systems, 3D additive manufacturing, air gages, bore & hole gages, calipers, CMMs, computed tomography, data collection, depth gages, fixture systems, indicators, laboratory equipment, vision systems, and thread gages among others. Services include calibration, metrology, repair, embedded services, training, and metrology pre-op services.

    • ICKey Internet Technology Co., LTD

      Distributor Overview

      Hello BOM is an online electronic component storefront designed to bridge customers and suppliers. Customers supply Hello BOM with their bill of materials (BOM) and Hello BOM uses smart analysis via AI data matching to quickly find precise matches that customers need. This is accomplished via Hello BOM’s growing component stock and product information database to grow increasingly accurate and fast, while also simplifying the process of R&D and purchasing for customers. Products include semiconductors, resistors, capacitors, diodes, inductors, connectors, transistors, and sensors.

Calibrator Manufacturer Ranking

*Including some distributors, etc.

Derivation Method

The ranking is calculated based on the click share within the calibrator page as of April 2024. Click share is defined as the total number of clicks for all companies during the period divided by the number of clicks for each company.

Number of Employees

  1. Yokogawa Electric Corporation: 17,258
  2. Oetiker Limited: 1,885
  3. Vaisala Oyj: 1,850

Newly Established Company

  1. Tacuna Systems: 2011 (13 years ago)
  2. Peak Technology: 2010 (14 years ago)
  3. Liaoning Huake Petroleum Apparatus Science & Technology Co., Ltd.: 2009 (15 years ago)

Company with a History

  1. Palmer Wahl Instrumentation Group: 1836 (188 years ago)
  2. Yokogawa Electric Corporation: 1915 (109 years ago)
  3. Microtech Gefell GmbH: 1928 (96 years ago)

Calibrator Manufacturers in United States

*Including some distributors, etc.

Global Distribution of Calibrator Manufacturers by Country

*Including some distributors, etc.

Country Number of Companies Share (%)
United States of America United States of America 48 46.2%
Germany Germany 13 12.5%
United Kingdom United Kingdom 11 10.6%
Japan Japan 7 6.7%
Switzerland Switzerland 4 3.8%
Italy Italy 3 2.9%
Canada Canada 3 2.9%
India India 3 2.9%
China China 2 1.9%
Taiwan Taiwan 2 1.9%
France France 2 1.9%
Netherlands Netherlands 2 1.9%
Czech Republic Czech Republic 1 1.0%
Singapore Singapore 1 1.0%
Finland Finland 1 1.0%
Denmark Denmark 1 1.0%

List of Calibrator Products

22 products are listed.

Captricion for noise meter SC-942-Custom Co., Ltd.

Custom Co., Ltd.

Captricion for noise meter SC-942

Calonial organs for digital noise. Various types of products are available, from simple models to models that support multiple frequency characteri...

Price (without tax)

$ 397.98〜

1 model listed

Calonial CDF to check the flow rate of Leak Florotester-Atech Co., Ltd.

Atech Co., Ltd.

Calonial CDF to check the flow rate of Leak Florotester

■ Introduction case ・ Check the flow rate of ATEQ Leak Flatester ・ Other Leak Flow Tester confirmation of flow rate ・ Company confirmation and r...


1 model listed

Water quality analysis parameters For water quality analytical conductivity conductivity calibration tools CLY421-Endress+Hauser Group Services AG

Endress+Hauser Group Services AG

Water quality analysis parameters For water quality analytical conductivity conductivity calibration tools CLY421

Portable calibration system for ultra -pure water application ◾️ Application CONDUCAL CLY421 is an optimal calibration tool for conductor measure...


1 model listed

Standard magnet-Magna Co., Ltd.

Magna Co., Ltd.

Standard magnet

It is a simple school regular device using a permanent magnet corresponding to our Gauss meter (MG-401 or later). Insert the standard probe and use...


4 models listed

Calonial manual leak calibrator QLC series-Cosmo Instruments Co., Ltd.

Cosmo Instruments Co., Ltd.

Calonial manual leak calibrator QLC series

The manual requetor is a calibration dedicated to differential airy testers that can cause any volume change. You can easily check the sensitivity ...


4 models listed

Calibrary CDF60 to confirm the flow of Leak Flow Tester.-Atech Co., Ltd.

Atech Co., Ltd.

Calibrary CDF60 to confirm the flow of Leak Flow Tester.

■ Introduction case ・ Leak detection Confirmation of the flow rate of Leak Flow Tester ·Flow control Other flow meters proofreading confirmation ...


1 model listed

Multifunctional temperature calibration ormator Ⅱ-Testo SE & Co. KGaA

Testo SE & Co. KGaA

Multifunctional temperature calibration ormator Ⅱ

It is a small temperature calibration organs that can be used for oil buses (liquid tanks), dried brocks, surface temperature blocks, and black fur...


1 model listed

Calonial manual leak calibrator LC series-Cosmo Instruments Co., Ltd.

Cosmo Instruments Co., Ltd.

Calonial manual leak calibrator LC series

The manual requetor is a calibration dedicated to differential airy testers that can cause any volume change. You can easily check the sensitivity ...


4 models listed

Calonic manual leak calibrator ALC series-Cosmo Instruments Co., Ltd.

Cosmo Instruments Co., Ltd.

Calonic manual leak calibrator ALC series

The manual requetor is a calibration dedicated to differential airy testers that can cause any volume change. You can easily check the sensitivity ...


4 models listed

Calonial organs CDP60 to confirm the pressure school of the leak florotester-Atech Co., Ltd.

Atech Co., Ltd.

Calonial organs CDP60 to confirm the pressure school of the leak florotester

■ Introduction case ・ Confirmation of pressure calibration of Leak Flow Tester ・ Confirmation of other pressure meters ■ Features ・ Automatic s...


1 model listed

Related Products

Component Analyzers
In-Circuit Board Testers
Image Measuring Instruments
Pneumatic Separation Systems
Continuity Checkers
Leveling Strings
Probe Cards
Pinhole Detectors
Analog Oscilloscopes
Continuity Testers
Plumb Bobs
Rebar Detectors
Scanning Acoustic Microscopes
Surface Gauges
Pinhole Inspection Machines
Film Inspection Machines

Search from All Categories

1201 Sensors
1203 Test Equipment
1204 Motors
1205 Pumps
1206 Relays
1207 Testing Equipment
1208 Analyzers
1209 Diodes
1210 Measuring Equipment
1211 Observation Equipment
1212 Printers
1213 Capacitors
1214 Switches
1215 Robots
1216 Cameras
1217 Connectors
1218 Meters & Instruments
1219 Generators
1220 Light Sources
1221 Power Supplies
1222 FA Equipment
1223 Machining / Machine Tools
1224 Boards & Circuit Boards
1225 Transformers
1226 Integrated Circuits
1227 Cables
1228 Transistors
1229 Controllers
1230 Electromagnetic Countermeasures
1231 Surge Countermeasures
1232 Drive Mechanisms & Components
1233 Scanners
1234 Servers
1235 Magnetic Materials
1236 Amplifiers
1237 Semiconductor Manufacturing
1238 Metallic Materials
1239 Terminals / Interfaces
1240 Temperature Control
1241 Fastening Components
1242 Network-related Equipment
1243 Development & Design
1244 Safety Devices
1245 Input & Display Devices
1246 Polymeric Materials
1247 Optical Components
1248 Purification Equipment
1249 Storage Devices
1250 Fixtures
1251 Heat Sources
1252 Sealing Devices
1253 Storage Products
1255 Fittings
1256 Valves
1257 Gloves
1258 Sanitary
1259 Springs
1260 Conveyors
1261 Resistance / Load
1262 Filters
1264 Converters & Transducers
1267 Cleaning Agents & Equipment
1269 Protective Materials & Equipment
1270 Hoses / Tubes
1271 Clean Room Supplies
1273 Clamps & Fasteners
1274 Adhesives & Repair Materials
1278 Analysis Software
1279 Stages
1280 Freezers
1281 Terminals
1283 Nozzles
1284 Cooling Equipment
1285 Bio
1286 Separation and Extraction Equipment
1287 Lubricator-related Equipment
1288 Business Efficiency Systems / Software
1290 Coils
1291 Paints
1292 Inorganic & Mineral Materials
1293 Dryers
1294 Blowers
1295 Agitators
1296 Weighing Equipment
1298 Packing Materials
1299 Processing Services
1300 Testing Services
1301 Tools
1302 Elements
1303 Chemicals
1304 Pesticides
1305 Building Materials
1306 Agricultural Materials
1307 Painting Services
1308 Vehicle related
1309 Construction Machinery
1310 Ship related
1311 Aircraft
1312 Transport Vehicles
1313 Global Environment

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree